Search results

Search the forum Search Articles
  1. M

    Keying?

    I see what you mean but sill cant see it for $150.00 Most Machine Shops (Not just Auto one) around here charge $80/h. V-Blocks +shims, Dial the part in, cut key, check size, finish pass on cut and de-burr. I a good shop could do that in 15-20mins now do it twice as you want the Cam and Crank. I...
  2. M

    Keying?

    If you guys were near me I could do them for cheap like. $150 seems like a lot for 30 mins of work hell if I knew I was going to do a bunch I could get them done faster.
  3. M

    Porting to reach high rpm breathing

    plasti dip not the spray can stuff be the stuff to make handles on tools works well for this.
  4. M

    Keying?

    True but I would not want it cut with a 5mm I would use smaller and size it in or rough it out with a 4mm than maybe finish with a new 5mm or just size it in with the 4mm
  5. M

    less than a month to race day

    Yes, but I am not sure the brown box mount for the lift pump is going to work so well lol
  6. M

    How eco friendly are you?

    Spray it before you do the burnout works better that way.
  7. M

    Asus rt-n12

    Thanks guys I will see what I can do to make it all work.
  8. M

    Asus rt-n12

    I know a few of you guys know your networking stuff real good. Anyone use the ASUS RT-N12 I am trying to setup my 3rd one and for the life of me can not get it to work. I have one setup as a Router the other 2 as Repeaters So #1 = Router - Works like it should ( Cable modem to...
  9. M

    Half my steering wheel buttons do not function

    pac audio makes what you need
  10. M

    Nice Wiha Driver for Allen Heads

    We had them too people would just swap handles as put the T15 in the T30 handle as it is the handle that control the torque. Yes I work with some stupid people the just don't care.
  11. M

    Nice Wiha Driver for Allen Heads

    If for mostly dash stuff they will be great I loved them but we were killing them left and right. We use them on carbide inserts screws. Lots of people over torque them and that does not help. For you, you will love the locking rings for the ones way under there.
  12. M

    Nice Wiha Driver for Allen Heads

    The ones I have now do not have the locking ring. The looking ring makes them a bit weaker we found. The guys that are stupid at work were breaking. Part of that is they don't use the right ones for the job. As using a Torx 15 on a Torx plus 15 screw. It just does not work out good for the...
  13. M

    LMM: New to sight and looking for input

    X2 ^ Plus add a blocker plate or full EGR delete turning off the EGR in a tuner is good but it will open after 25 or so PSI so blocker or delete. pcv reroute too.
  14. M

    Ooooooooohhhhhhh canada

    I talk to him today he is looking into it as far as he knows it is only old stock that people have been buying in Canada that still has the deletes. He may have a source of stock of them but needed to call and make sure.
  15. M

    LML EGR Delete?

  16. M

    Ooooooooohhhhhhh canada

    He was not in today but I will call him tomorrow when I get up.
  17. M

    Ooooooooohhhhhhh canada

    I will call my guy tomorrow and let you know.
  18. M

    Info: App to remote start truck

    I did not know that I have not had OnStar in my truck since the 3rd week of taking it off the lot. It's all taken out lol. viper smartstart is one but you have a monthly bill.
  19. M

    Info: App to remote start truck

    Yep the GM one lol it uses Onstar so not cheap. I have yet to see one that you don't have a monthly bill. So it may cost you a lot. Just get a killer 2way aftermarket starter. That has the range you want.
  20. M

    Mike and Guy, I'm calling you out!!

    I wish it was that nice here.
Top Bottom