Search results
-
H
LBZ: fuel rail pressure sensor .
Can anyone help me with a fuel rail pressure sensor for my 06 lbz and a cheap finger stick . the finger stick I was using went bad and started giving me maf codes but now that the egr is still blocked with the plate it keeps throwing the egr codes. -
H
Ok guys need help here ASAP leaking trans lines
could you post a parts list of the Aeroquip fittings you used I'd like to redo my lines . they only drip a little bit when it's really cold. -
H
p0103 trouble shooting
Replaced the sensor and didn't fix the code. Removed the finger stick and no more codes except for the EGR witch is because of the blocking plate . -
H
LB7 Problems
you may need to have someone flash the TCM if it sat unplugged for a while .I had the same thing happen to me with the 4x4 control mod.- HDLBZ
- Post #3
- Forum: Mike L's Trans Talk
-
H
p0103 trouble shooting
Can anyone tell me if my fingerstick can set this code or a bad sensor? -
H
low rail pressure
thanks for the input thats the best feedback I've got on here everyone keeps saying about checking them with the scanner . So do they have to be removed to test them? if they're bad can they be rebuilt or dose the injector need replaced -
H
LBZ: LBZ Help!
My truck is doing the same thing only does it every now and then ,already replaced the inj. pump and added a air dog 150 still not fixed the injectors checked out fine my next step is to reflash the ECM or replace it with a pre programed one with a switch . -
H
Emergency Relearn on ECM works on LBZ
thanks I'm new here and still trying to find my way around . -
H
Emergency Relearn on ECM works on LBZ
thank you I would like to get one of the ecm's programed with a switch installed does anyone on here do custom ecm's? -
H
Emergency Relearn on ECM works on LBZ
If i would do this will my old ecm still work by just plugging it back in ? -
H
low rail pressure
Running a predator only run the lite tow tune but have been on stock since having the problems . I didn't put in a suction tube . Starting last week i'm getting a P0103 mass air signal high it may be a wiring issue with the finger stick or a bad stick.I can't afford to drop it off at a shop and... -
H
low rail pressure
thanks guys . I checked the injector rate and its fine .checked the glowplugs by swopping them with the plugs beside them and still getting the glowplug codes . thats why i'm looking at the ecm because its hit and miss on when it sets the codes . may just get the ecm re flashed and go from... -
H
low rail pressure
I'm not against the race valve but it don't happen every time . I drive the truck daily and it only limps if it displays change fuel filter and sets the glowplug codes rite off when you turn on the key . If it don't display anything and the glowplug cycle normally the truck runs fine no problems... -
H
low rail pressure
Hi Just joined and have had a problem for a while now with low rail pressure this issue started out with getting a change fuel filter display and changed the filter and couldn't clear the display. after a while it started throwing a glowplug 6 code ,after a week it went to a number 6 and number...