Anyone running cognito braces and a bilstein steering stabilizer on a lmm? Didn't know if the braces would clear since the stabilizer is bigger then the factory one. Any help would be appreciated.
Lmm cognito braces and steering stab help
- Thread starter Rancelot211
- Start date
Will not clear on the NBS trucks. The brace is a better option if choosing one or the other, we have plenty of trucks with huge tire/wheel packages and no stabilizer without issue.
What exactly doesn't clear? Does it just hit the stud where I can cut it down or the shock body or what. I just spent 300$ on both so I'd like to try to make them work
I would just run without the stabilizer and see how it drives first. I threw mine away doing the same thing you are trying.
The stabilizer doesn't do a thing if you have a proper alignment and steering parts that aren't worn sloppier than throwing a hot dog down a hallway. It's gm's way to help stop the feeling bump steer but doesn't help
What stabilizer are you running? Bilstein 5100? And if it just hits the shock body I ca. Cut the stud out flip the shock around and use bolts. And I only want to make it work because I already spent the coin on it lol.
Yep I'm running the 5100. I had no problems bolting it all up. I have nothing hitting the shock body.
Would you be able to take some pics and send them to me? I haven't tried everything yet put plan to do so this weekend
Cognito PISK and the bilstein steering stabilizer clear each other just fine on the LMMs. I have this setup on several trucks. You'll be good to go.