What would be better for me? The cognito braces actually tighten up the steering, correct? That would be great since I hate the loose wiggle in the steering. But they reduce turning radius sooo... Which do you prefer and why?
Wolf.
you need to find where the play is coming from first.
cognito supports dont reduce turning radius if you make sure they clear the frame and/or clearance them to fit. only some trucks need that
i prefer neither as they are just a bandaid on a problem. others will say differently but thats why its my opinion![]()
you need to find where the play is coming from first.
cognito supports dont reduce turning radius if you make sure they clear the frame and/or clearance them to fit. only some trucks need that
i prefer neither as they are just a bandaid on a problem. others will say differently but thats why its my opinion![]()
New pitman/idler arm and bracket, new tierods as well. Some of the slack is in the gearbox. But I can move the steering will + or - 10 degrees before wheels move. Roughly
Speaking of steering (James you dirt bag:hughow in the blue blazes do you get Mac to call or e-mail you back? I would love to get my hands on one of his steering kits but... Your the only guy I know lucky enough to get one before Cognito started there sh*t.
you need to be sure where its all coming from. new or not, after the launches ive seen you post about, they very well can hurt new parts
I figured as much, sucks.you wont.... ive tried to get ahold of Mac off and on for the past few years. never got anything back. i think about 10 kits made their way out before they got sent the letter from cognito. sucks too cause its still my favorite kit and i need a new piece on the end of mine that rusted and cross threaded.
i really really wish i could figure out a way to get rid of bend in the centerlink all together but the frame and motor wont allow it...
I can barely move the centerlink up or down with truck in the air. No side to side slack. One ball joint has some wear... Minimum wear really.
PM me, I've been here long enough. I'm tired of messing with this I want it right.
I figured as much, sucks.
Take some video of it launching. Might be able to see something going on?
you wont.... ive tried to get ahold of Mac off and on for the past few years. never got anything back. i think about 10 kits made their way out before they got sent the letter from cognito. sucks too cause its still my favorite kit and i need a new piece on the end of mine that rusted and cross threaded.
i really really wish i could figure out a way to get rid of bend in the centerlink all together but the frame and motor wont allow it...
What bend in the centerlink are you talking about not being able to eliminate?