So Im pretty sure I have to pull my transmission out for bad C1 clutchs. I have the TTS shim installed right now would it be better to install the ats pump spring and ditch the shim?
TTS kit w/ alto clutchs. Im pretty sure I fried my clutchs this weekend playin in the mud.
What's it doing to make you think you fried the C1s? I've had multiple C1 failures, and it always acted the same.
What's it doing to make you think you fried the C1s? I've had multiple C1 failures, and it always acted the same.
Sounds like you had a decent trans setup and it got toasted playing in the mud like you said. All that spinning then grabbing can hurt any trans. Did you overheat also? I'd probably just freshen it back up.
You might not want to play in the mud I took my truck in the mud for the first time and lets just I did some damage.
It pops the 0722 code continuously, that being said if I drive the truck and put any foot into it in gears 1-3 it will slip and eventually throw an incorrect gear ratio code for whichever gear its in.
gears 4-6 feel fine and the converter locks fine.
C1s are still used in 4th.It pops the 0722 code continuously, that being said if I drive the truck and put any foot into it in gears 1-3 it will slip and eventually throw an incorrect gear ratio code for whichever gear its in.
gears 4-6 feel fine and the converter locks fine.