Hoping for some ideas here guys. I went a little too deep tapping the 1/2" NPT tap for the oil return line for my turbo in the top of the oil pan. Just barely too deep, is pretty tight, but leaks just enough to leave a small spot on driveway everyday. I have tried sealing this with teflon tape, Permatex black adhesive silicone, etc. Still getting a little leak.
Looking for any experience/ideas you guys might have to seal this. I guess worst case plug it and drill another hole and actually tap it correctly, but the plug would still leak, I would have to maybe use the help of my old friend JB (JB Weld).
Looking for any experience/ideas you guys might have to seal this. I guess worst case plug it and drill another hole and actually tap it correctly, but the plug would still leak, I would have to maybe use the help of my old friend JB (JB Weld).