Zone lift 5 inch

[Troysalm71]

Putting a zone lift on an lml, truck in sig. was curious anyone else running it? The question I have as well would be most lifted trucks always have the rear tires in set more then fronts. I was curious would it be a btr option to get wheel sockets for the rear?

 

[foss28]

how far dose your front tires stick out how dose the truck ride with the lift?

 

[Troysalm71]

My lift isn't in yet. We just messaged each other. My tires right now I would say 3 inches out from the fenders, but I do have -20 wheels. You could go positive if you don't like that look. My lift should be here next week an hopefully installed. Right now on 35s torsional cranked rides like crap. I haven't even put a 100 miles on truck like that I'd drive my 6.5 over this truck right now. It's terrible to drive like that. It had 33s with these same wheels an they cleared an rode very nice.

 

[Blackmax123]

The zone 5" lift will not add any width to the front of the truck.

I have one on my lml, also put of on a buddies 13 2500hd gasser. I really like my lift can't complain about anything with it.

 

[Troysalm71]

The zone 5" lift will not add any width to the front of the truck.

I have one on my lml, also put of on a buddies 13 2500hd gasser. I really like my lift can't complain about anything with it.

Thank you was hoping to hear that. A friend had an lml with fabtexh 4 inch I believe an had to put 2 inch spacers in rear to line back up.

 

[foss28]

`please let me know how you like it wen it is installed an how it rides> im looking at the lift an the pro comp.

 

[Troysalm71]

`please let me know how you like it wen it is installed an how it rides> im looking at the lift an the pro comp.

Will do sir. Crossing fingers I get a decent ride.

 

[Blackmax123]

I just have the shocks my came with and the ride is great. My is tuned down quite a bit though because I wanted to keep the back a little high so it sat level when my gooseneck was hooked up. I'll be throwing a set of 35x12.5's on mine soon.

 

[Troysalm71]

Lift just came in, going to go drop truck off with my brothers busy today. He's got a two post lift to make life easier.

 

[Troysalm71]

Going in tomorrow

 

[foss28]

how do you like it any problems like the ride would you do the same lift again

 

[Troysalm71]

It's actually just getting tore down to get the lift put in. The 35s that are under it with how wide the wheels are an the keys being so far cranked I'm sure anything would ride better. Will know more after it's done an aligned though will keep posted.

 

[foss28]

How did it go do you like the lift ?

 

[Troysalm71]

He hasn't sent me pics yet. I'm not doing it one of my brothers friends is since he has the lift to do it. I'm hoping to hear something back tonight though.

 

[WVRigrat05]

Any lift is better than leveled foss, nice thing about the zone is the price and it doesn't shove the tires out 2-3 more inches than stock.

I'm going to be ordering a zone for my LMM soon, I've been sporting leveled trucks since high school and the older I get, the more annoying the ride and parts changing gets.

 

[countrycorey]

Which lift keeps track width closest to stock?

Sent from my SAMSUNG-SM-G930A using Tapatalk

 

[Troysalm71]

Lift is in a lot bigger then I thought I could clear 37s if I wanted.

 

[Troysalm71]

Lift

Lift pics

 

[Troysalm71]

Any lift is better than leveled foss, nice thing about the zone is the price and it doesn't shove the tires out 2-3 more inches than stock.

I'm going to be ordering a zone for my LMM soon, I've been sporting leveled trucks since high school and the older I get, the more annoying the ride and parts changing gets.

I'm with you I'll be lucky at the very least my uca's aren't completely shot. Never again will I do just keys the ride was way too rough.

 

[WVRigrat05]

I'm with you I'll be lucky at the very least my uca's aren't completely shot. Never again will I do just keys the ride was way too rough.

I kept stock keys, but mines a z71, but I did do shock extenders. Mine rides stiff, not as bad as some but it eats uca's and pitman/idler arms.

I'm gonna get a lift on and a couple small bolt ons before the baby comes and I'm done for a while, I want the truck to ride good and not jar everyone to death.