LB7: Y bridge - boost gauge hookup

[kellock]

hi can anyone tell me where and what the y bridge is I heard that's the best place to hook up a boost gauge 03 lb7 stock

 

[minerigger]

It's under the intake horn that's bolted to the front of your turbo. It's what the air goes through thus being distributed to the intake runners and into the head

Sent from my SM-G900V using Tapatalk

 

[duramaxzak]

Buy a AIH delete plug and hook up your boost gage to 1/8" port.

http://www.xtremediesel.com/XDP-Air-Intake-Heater-Delete-Plug-XD130.aspx

 

[TheBac]

I was wondering when someone would link to that.

 

[kellock]

y bridge

thanks guys will check it out

 

[Stancedlb7]

Just an FYI you need efi live to turn the CEL off when deleting the AIH.

 

[OregonDMAX]

Just an FYI you need efi live to turn the CEL off when deleting the AIH.

Is 03-04 different because my 02 didn't.

 

[Stancedlb7]

Yeah. Instead of buying a delete plug I ended up just grinding off the spring heater and capping the wire. Found out it threw a couple codes.

 

[TheBac]

Is 03-04 different because my 02 didn't.

Might be because you rarely use it in Az compared to Ut.

 

[c20elephant]

AIH is also for emissions...

 

[TheBac]

Az LB7 has emissions?

 

[c20elephant]

If it sets a CEL when deleted more than likely an emissions code, I'll see if I have a LB7 tune and open it.

Edit 2001 LB7 tune:

P0540 Intake Air Heater circuit.

2 Trips, Emissions Related.

 

[OregonDMAX]

Might be because you rarely use it in Az compared to Ut.

It never coded in Oregon even at -24*

 

[Vincode1]

I don't have EFI, so I couldn't delete the code. When I took my heater out I wired in a light. No codes.

 

[mike diesel]

It never coded in Oregon even at -24*

My 02 threw p0540 every single time anything below 40°.

 

[kellock]

code

Just an FYI you need efi live to turn the CEL off when deleting the AIH.

when I installed mine it threw a code I just run a inline 12vot light from the hot wire from the heater to light then grounded it works good no more codes plus I still have heater if I need it in winter

 

[kellock]

I'm in Canada and I did the same thing only I put a plug in instead of heater then wired a light in also wired the hot line from heater to one side of lite and grounded the other side also had to delete code with obs 2

 

[kellock]

delete code

Just an FYI you need efi live to turn the CEL off when deleting the AIH.

I deleted mine with a ob2 then run the hot wire to a lite and then grounded it no more codes

 

[Awenta]

Got it..... Thanks.

Sent from my SM-N910V using Tapatalk

 

[Hucks72]

I did this mod a couple months ago, the truck had efi live when I bought it and works but I only have the 5 switch no computer, do I have to buy a whole new setup to get rid of the code or how do I wire a light in there was only one wire going to the heater is that the 12v then just ground the light anywhere or what if anyone has pics or can help out that would be great tanks in advance