I didn't think they were supposed to have blocks but I wasn't 100%. The truck had a lift already in the back when I got it.
Also the only u bolts I can find are for lifted and leveled trucks.
Sent from my SM-G920V using Tapatalk
Torsion bolts removed
- Thread starter motoking_1990
- Start date
Also the only u bolts I can find are for lifted and leveled trucks.
Sent from my SM-G920V using Tapatalk
Find a 4x4 parts store and get ubolts that are threaded all the way down then when you install them you can cut off the extra.
5 leaf pack yes, couple companies on ebay that will bend what you need or go the dealer. Double check this number on Ebay GM 11518426
Last edited:
37 bucks for one u bolt with out bolt or washer. Wow
Sent from my SM-G920V using Tapatalk
I got a set of 4 with bolts and washers from a local 4x4 shop for that price. EBay isn't always the best
I'm not going to get the stance I want with the truck being lowered. Not with 20s anyway. Ran across a good website to find out what wheels fit. Customwheeloffset.com
Sent from my SM-G920V using Tapatalk
Sent from my SM-G920V using Tapatalk
I can get the stance but it won't be very practical. I could cut fenders I suppose.
Sent from my SM-G920V using Tapatalk
Sent from my SM-G920V using Tapatalk
Exactly. I want to go lower but the offset I want will rub bad.
Sent from my SM-G920V using Tapatalk
I know most of you don't like offset wheels. I like to have some lip and for the wheel to stick out a bit it's a mean look and I love it. But going to a 3/4 drop the wheels will rub pretty bad.
I just don't want to spend 4K on some wheels and tires and not like them. Or them rub so bad they won't work. I have 285/75 cooper sst now and the truck is leveled. They rub fully cranked
Sent from my SM-G920V using Tapatalk
I just don't want to spend 4K on some wheels and tires and not like them. Or them rub so bad they won't work. I have 285/75 cooper sst now and the truck is leveled. They rub fully cranked
Sent from my SM-G920V using Tapatalk
My truck is 20x12s -44 with 285/55 toyo at2. It could be done a lot easier with 285/50 4 plys but I'm not big on 4plys since I use my truck and I'm on gravel.
My tires are the same height as a normal 285/75/16 tire on a way wider and more offset wheel, with no torsion bolts. Does it rub? Yea but it's manageable and if I wasn't to lazy I could fix that.
I posted a large fender mod on here the other day on classic body style trucks. You can cut one and make it look clean if you want to.
Sent from my iPhone using Tapatalk