That's correct, our fabricated pedestals are 7" tall. If we use cast we use an HTT with a 1.5-1.75" spacer block. The short pedestals don't allow the 3" y-bridge to work well.
The build is a GO!
- Thread starter mike diesel
- Start date
That's correct, our fabricated pedestals are 7" tall. If we use cast we use an HTT with a 1.5-1.75" spacer block. The short pedestals don't allow the 3" y-bridge to work well.
Thanks joe, if this pedalstal doesn't work out then I'll be ordering one of yours
Sent from my iPhone using Tapatalk
I have a 6 1/4" ats pedestal that I'm gonna be using with a s400 in the valley. Is it gonna be a pain in the ass getting a 3" ybridge and piping in there?
Took my valve covers and intake manifolds to work last night and soaked them in the solvent tank. The intake manifolds were caked in sludge from 140,000 miles of egr and pcv.
Also painted them and sealed them to the new socal heads!
Also painted them and sealed them to the new socal heads!
I'm not sure. It is oily and smells alot like kerosene. All I know is that it works great.
Machine shop said i should be good to snag the motor tomorrow. And i should have new tunes tonight. I'm going to be pretty limited with my 30% injectors. Oh well...I will go bigger eventually.
