I ran 11.8's on stock shocks and caltracs... But I was spinning and hopping all over to a 1.76 60' I now have qa1's and 3 inch drop shackels with a decent track prep I expect low 1.6 60's
suspension setup for high 11's
- Thread starter redws6rocket
- Start date
talk to "the funk" about his setup. he street drives his truck still a lot but his 1.49 60' times are no joke. shit leaves hard!!!!
IIRC he runs qa1's on all 4 corners, caltracs, drop shackles, and M&H Cheater Slick's truck has next to no weight transfer its a thing of beauty
IIRC he runs qa1's on all 4 corners, caltracs, drop shackles, and M&H Cheater Slick's truck has next to no weight transfer its a thing of beauty
it really is amazing for a street truck. last time I drove it it was pretty stupid and then he found out the waste gate was partially stuck open lol. Ever since the TC issue though his trans has made me wanna shoot myself
hmmmm well i can't find any. I know he has go pro vids and it's been video'd but i can't find them on there. It's not a 1K rwhp truck yet but the suspension just works sooooo damn good it's beautiful.
yeah thats the truck,,, that either an old vid or just a bad launch,, he's way down in the 11s knocking on the 10 second door
1.8's can be done with stock suspension...
I have had a handful of high 1.5x's with stock suspension...
I had stock size cooper zeons @60psi with CalTracs not lowered and nothing removed from the truck and get 1.8's
Obviously sleeves and braces. Lower torsion bars. QA1 or Rancho adjustable shocks on front, stock shocks on back. Clamp front of rear springs or Caltracs. 265-size tires.
I could get low 1.6s out of that setup. I feel with more practice on the drag radials I can get into the 1.5s.
I could get low 1.6s out of that setup. I feel with more practice on the drag radials I can get into the 1.5s.
I cut some high 1.5s and constant 1.6s on proxies and that was without caltracks I spent alot of time working on the launch .the times shown was on a 1057 conver