suspension setup for high 11's

[The Funk]

It has cut 1.48s and constant 1.49s but it was in cheaters.I was just saying what I did on 265 proxies for cheep it just takes work and alot of nights at test and tunes

 

[Jscherbs]

It has cut 1.48s and constant 1.49s but it was in cheaters.I was just saying what I did on 265 proxies for cheep it just takes work and alot of nights at test and tunes

was that with qa1's?

what was your best with 265's and clamps? i have no intensions on going back to cal tracs.

 

[madmatt]

It has cut 1.48s and constant 1.49s but it was in cheaters.I was just saying what I did on 265 proxies for cheep it just takes work and alot of nights at test and tunes

oh my bad,, the tires thing through me,, didn't catch that till you mentioned it just now.

 

[The Funk]

Qa1s front and rear and clamps on 265 proxies it cut high 1.5s and low 1.6s

 

[red1977]

Does the proxies work good for the track?

 

[Jscherbs]

Does the proxies work good for the track?

a lot of people use them for the track at cut 1.5's-1.6's all day long. best i got on my bfg at's was a 1.62 so ill try proxys next year and see what happens.

 

[red1977]

Thinking thats what I'm going to try.

 

[Dirtymaxx03]

nitto 420's are pretty badass too

 

[paint94979]

nitto 420's are pretty badass too

I run PYO's and 420S's don't come in 16's

 

[Dirtymaxx03]

Yea I know. I wanted them so bad but nooooo not for the little rim guys

 

[red1977]

That's what I will be putting them on in my pyo's

 

[DMAXchris]

That's what I will be putting them on in my pyo's

Try to find the Proxes ST1. They have a better tread pattern for drag racing than the ST2.

 

[red1977]

Try to find the Proxes ST1. They have a better tread pattern for drag racing than the ST2.

Alright thank you.

 

[SHOTZY]

I cut some high 1.5s and constant 1.6s on proxies and that was without caltracks I spent alot of time working on the launch .the times shown was on a 1057 conver

Man that thing launches beautiful. If you dont mind me askin, what settings are you using on the qa-1's? I've got my rebound set to the tightest setting and compression set on the 12th click and mine is still lifting. Did you strap also?

 

[LBZrcks]

]I cut some high 1.5s and constant 1.6s on proxies and that was without caltracks[/B] I spent alot of time working on the launch .the times shown was on a 1057 conver

Was that with the QA1's or clamps and stock shocks?

 

[madmatt]

Was that with the QA1's or clamps and stock shocks?

Pretty certain that was on his qa1s. He's ran them for a while and has it pretty dialed in suspension wise.

 

[LBZrcks]

Pretty certain that was on his qa1s. He's ran them for a while and has it pretty dialed in suspension wise.

Thanks.