Stupid newby AFE 5" exhasut exit question

Harbin_22

Harbin_22

Active member
Dec 4, 2010
3,858
7
38
Southern Indiana
Sorry for the newby Duramax forum type question, but I am probably moving up to 5" exhaust. Had my eye on AFE but want to see how it exits out the back. I don't like the full 90° look that points perpendicular to the truck body, some of the others point too much straight back out of the bumper area. I want an in between and can't seem to find the one I want. I like how my banks exit now. Try to find a pic for comparison. Please post a pic and what brand if you have the style I am wanting. 5" only please.
 
clrussell

clrussell

pro-procrastinator
Sep 23, 2013
5,928
399
83
I've got afe 5" I'll get ya pics in a few


Sent from my iPhone using Tapatalk
 
Harbin_22

Harbin_22

Active member
Dec 4, 2010
3,858
7
38
Southern Indiana
Yeah I think the flopro and DE have it pointing to straight back for my liking. I was going to go with Magnaflow but it has the 90° exit that I am that fond of.
 
clrussell

clrussell

pro-procrastinator
Sep 23, 2013
5,928
399
83
I'll crawl under my truck in just a few. I really like the afe kit. Good clamps and it fit good.


Sent from my iPhone using Tapatalk
 
Harbin_22

Harbin_22

Active member
Dec 4, 2010
3,858
7
38
Southern Indiana
Burn Down said:
http://www.duramaxdiesels.com/forum/showpost.php?p=947102&postcount=28
This is a 5" stainless Magnaflow... Not sure if it's the style you want or not? It fits fine, hangers blow goats and all have been re-welded, stainless is cheap as well, rusted up pretty good. I have heard very good things about the Flopro stuff.
Click to expand...

That isn't too bad on the exit. Most other pics I found were looking like it pointed straight out like perpendicular to the tire if that makes sense.
 
clrussell

clrussell

pro-procrastinator
Sep 23, 2013
5,928
399
83
Harbin_22 said:
I really don't care for the MBRP hangers and couldn't find anything about how far forward the 5" actually starts.
Click to expand...


Most exhaust kits go 5" after the torsion crossmember


Sent from my iPhone using Tapatalk
 
Burn Down

Burn Down

Hotrodder
Sep 14, 2008
7,092
28
48
Boise Idaho
Harbin_22 said:
That is too bad on the exit. Most other pics I found were looking like it pointed straight out like perpendicular to the tire if that makes sense.
Click to expand...

Ya, I get what your saying. I don't like the 90* exits either, the magna is kinda between the musket exit and the 90* ones... Just be aware the spring hangers will rip out of the pipe after awhile. The AFE one might be the ticket. Id like to see the pipe hangers on it.
 
clrussell

clrussell

pro-procrastinator
Sep 23, 2013
5,928
399
83
So apparently it's hard to take exhaust pics when you have a lowered truck


Sent from my iPhone using Tapatalk
 
Harbin_22

Harbin_22

Active member
Dec 4, 2010
3,858
7
38
Southern Indiana
Burn Down said:
Ya, I get what your saying. I don't like the 90* exits either, the magna is kinda between the musket exit and the 90* ones... Just be aware the spring hangers will rip out of the pipe after awhile. The AFE one might be the ticket. Id like to see the pipe hangers on it.
Click to expand...

Is the stainless cheap enough that a regular mild steel mig welder setup could weld supports on it you think?
 
clrussell

clrussell

pro-procrastinator
Sep 23, 2013
5,928
399
83
Got ya some crappy pics Kyle.

Here's the exit. It was pretty close to 90 when I had no tip. But I fudged it a little with the tip and other adjustments because I'm like you and wasn't a fan of the 90* or the bumper exit.

972894147fbc78abf63360618264bd50.jpg

2173cd2275c9d533de9e9255d9965ef5.jpg


It starts at 5" about 2" from the factory down pipe clamp
7ede1bfdf36f429d48bf6ad1dd2cc9ee.jpg


Good clamps
80d7b5dc6ff239f5171c7a74415dbfd7.jpg


Randoms
68798aca08e7b4a711cd3eb87a3c2efc.jpg

943dd6737601f405e2e9c713cb22b92e.jpg

2d330de13cc0eafe2f3bf1ada6116262.jpg




Sent from my iPhone using Tapatalk
 
Harbin_22

Harbin_22

Active member
Dec 4, 2010
3,858
7
38
Southern Indiana
Burn Down said:
The AFE one might be the ticket. Id like to see the pipe hangers on it.
Click to expand...

I put a 4" AFE system on the other day it was really nice and fit great. Hangers looked like OEM stuff really. Same way with my Banks stuff. Fit great, OEM looking hanger setup, and haven't had a bit of trouble for 5 years out of it. Kind of the experience I would like to have with 5" setup lol
 
You must log in or register to reply here.
Top Bottom