stock/4094 compressor wheels

[mike diesel]

So i said ufck it and I dropped my stocker off to get the 68mm wheel put in. He said couple days. So maybe Tuesday or Wednesday next week I will put it on. Gives me a few day to decide if I'm really going to sell parts or not.

 

[03spoolindmax]

Not sure if anyone mentioned it but The exhaust side of a 4094 is bigger also. Not sure what gains can be had with upgrading the compressor side to a 68mm and leaving the exhaust side stock.

 

[mike diesel]

Not sure if anyone mentioned it but The exhaust side of a 4094 is bigger also. Not sure what gains can be had with upgrading the compressor side to a 68mm and leaving the exhaust side stock.

Yea i knew the exhaust side is larger. I'm not really expecting any miracle from this, just figured I had the wheel, might as well put it to use. Not to mention the 11 blade stock wheel has almost no whistle to it, 6 blade 4094 wheel should sound decent. Never really could tell when it was in the 4094 because of the super scream from the turbine. Stock turbine is pretty quiet.

 

[03spoolindmax]

Yea i knew the exhaust side is larger. I'm not really expecting any miracle from this, just figured I had the wheel, might as well put it to use. Not to mention the 11 blade stock wheel has almost no whistle to it, 6 blade 4094 wheel should sound decent. Never really could tell when it was in the 4094 because of the super scream from the turbine. Stock turbine is pretty quiet.

My 4094 screams. I can barely hear my 480 spool over the sound of the 4094

 

[henery97]

I've been kicking around the idea of using the 4094 compressor with a 10 blade 6.0l turbine wheel and fingers vanes. Interested in how this turns out.

 

[NC-smokinlmm]

It will cause high EGT's without exhaust side mods. At least do fingers vanes...

Plus, a buch of guys snapped the shaft trying that...

 

[mike diesel]

It will cause high EGT's without exhaust side mods. At least do fingers vanes...

Plus, a buch of guys snapped the shaft trying that...

How did they snap the shaft trying what I'm doing? The shaft is identical in a 4094 and you never hear of a snapped shaft in a 4094. Even when you hang a big 72mm wheel off one I have still never heard of a snapped shaft.

 

[mike diesel]

And not to mention, fingers vanes are like 500 bucks. The goal here is to put Money back into my pocket.

 

[NC-smokinlmm]

How did they snap the shaft trying what I'm doing? The shaft is identical in a 4094 and you never hear of a snapped shaft in a 4094. Even when you hang a big 72mm wheel off one I have still never heard of a snapped shaft.

Do some research or talk to the right people. Snapped shafts arent uncommon on modded stock chargers. The exhaust side of a 4094 is better balanced on the exhaust side vs the compressor side. I'm not a turbo guy so thats the best I can explain it...:hug:

 

[ThebigGids]

And not to mention, fingers vanes are like 500 bucks. The goal here is to put Money back into my pocket.

going to need to for that wedding !

Congrats by the way!:thumb:

 

[mike diesel]

going to need to for that wedding !

Congrats by the way!:thumb:

Thanks man!

 

[mike diesel]

Do some research or talk to the right people. Snapped shafts arent uncommon on modded stock chargers. The exhaust side of a 4094 is better balanced on the exhaust side vs the compressor side. I'm not a turbo guy so thats the best I can explain it...:hug:

Im having the turbo fully balanced as well.

 

[henery97]

Snapped shaft is probably do to excessive drive pressure from the small stock exhaust side.

 

[yellowchevy]

Johns vanes are not $500, you guys are smoking dope!!!

Yellowchevy

 

[mike diesel]

Jons vanes aren't worth the investment to me regardless how much they are.

 

[wrcknkrw]

Have you gotten the turbo on yet? Are you still keeping dual pumps?

 

[mike diesel]

I should be getting the turbo back today I would imagine. Dont think i will be putting it on for awhile tho. I just don't think i can put my truck back to stock quite yet. I like it too much. But if/when i do put the modded stocker on i will definitely not be running my dual pumps. Way too much fuel for that turbo.

 

[mike diesel]

Got my turbo back today finally. Seeing as I just paid my truck off and bought a house, I have no need to sell any of my go fast parts anymore so as of now this turbo is going to be sitting on the shelf indefinitely. Only thing I can see myself doing with it in the near future is making a twin kit out of it so I can keep my egr looking functional since I need it to pass inspection...but until then...it will sit and look pretty

 

[DMAX497]

Got my modded stocker in. Runs good! It's like stock but pulls harder. Granted I have dual c's and nozzles.

Maybe I'll get a twin kit/ single kit again or sell my truck.

 

[TROJAN366]

Got my modded stocker in. Runs good! It's like stock but pulls harder. Granted I have dual c's and nozzles.

Maybe I'll get a twin kit/ single kit again or sell my truck.

Seems like you have no idea what you want to do hahaha