Simon's new test mule
- Thread starter mplteddy
- Start date
Ya Kat, now I remember tasting that smoke while snapping that shot.... 
But he has a cheatah now....
But he has a cheatah now....
Its running on its own for now
still haveing fuel issues and some odd shit going on after replacing plugs and seals for the pop valve on the fuel juntion block Mike suggested we welded it shut and now all is better
what we assumed was leaking from the bottom of the cp3 was actually a jet coming out of the pop valve onto the cp3
um and dumb dumb move of the day was when installing a regulator into your cp3 make sure there is a barrel and sping
im going back to work tommorow so i wont get a chance to work on it again for a bit
i did manage to get a vid of it idleing,but never posted a vid before so.....Screw it
still haveing fuel issues and some odd shit going on after replacing plugs and seals for the pop valve on the fuel juntion block Mike suggested we welded it shut and now all is better
what we assumed was leaking from the bottom of the cp3 was actually a jet coming out of the pop valve onto the cp3
um and dumb dumb move of the day was when installing a regulator into your cp3 make sure there is a barrel and sping
im going back to work tommorow so i wont get a chance to work on it again for a bit
i did manage to get a vid of it idleing,but never posted a vid before so.....Screw it
Its running on its own for now
still haveing fuel issues and some odd shit going on after replacing plugs and seals for the pop valve on the fuel juntion block Mike suggested we welded it shut and now all is better
what we assumed was leaking from the bottom of the cp3 was actually a jet coming out of the pop valve onto the cp3
um and dumb dumb move of the day was when installing a regulator into your cp3 make sure there is a barrel and sping
im going back to work tommorow so i wont get a chance to work on it again for a bit
i did manage to get a vid of it idleing,but never posted a vid before so.....Screw it
You quitter!!
Email them to Kat, I'm sure she can figure it out.
I thought we put a plug in that junction block to eliminate the pop valve-or am I thinking of something else?
You quitter!!
Email them to Kat, I'm sure she can figure it out.
I thought we put a plug in that junction block to eliminate the pop valve-or am I thinking of something else?
we did! and it blew the seal in about 1 second replaced with a O-ring it blew.....then went and got another better seal and it blew,then replaced with a new oil drain plug and seal and it blew 18mmx1.5 pitch and yup it blew the seal also
the problom is it is not suppose to seal on the end of the plug the stock valve that threads in is tapered and actually seats in there and seals that way.....DUH
the problom was that the valve was too long to fit back in there because of the MASSIVE Y bridge
so Ted cut er off and welded it shutwe laughed thinking WTF didnt we just do that in the first place
thankfully Mike didnt say i was dumb for not thinking about it
WE NEED VIDEO!!!!!!
congrats on getting her running, I will drink some Canadian beer in your honor:canada::alc:
congrats on getting her running, I will drink some Canadian beer in your honor:canada::alc: