SC dyno day Feb. 20th
- Thread starter WolfLMM
- Start date
Redneck Nationals
I was there but was having problems. Nothing major just a little nos problems and od course traction. That track was loose! Lots of sand blowing around. I was toward the end of the track out of everyones way. Jeff
I was there but was having problems. Nothing major just a little nos problems and od course traction. That track was loose! Lots of sand blowing around. I was toward the end of the track out of everyones way. Jeff
not true after every one of my passes i would park my truck and run to the fence to watch the rest of the pro street trucks make passes and you and your possee were in my way every time:hug
f course it could have also been that i was parked almost directly off of you guys.it was a good event,the track was bad,but the number of trucks was huge and all the racing was very close,made watching lots of fun...
Wish we could have made it down, would have liked to have met a bunch of you. Sorry to hear about the truck Skintback - any idea what let go? We went to a local Grudge race day and dyno instead.
First pull is on the Moonshine level 2 - 400 rwhp 769 ft.lbs. torque
2nd & 3rd pull is on Moonshine level 4 - 478 rwhp 917 ft.lbs. torque
Fourth pull is on the Moonshine level 5 - 484 rwhp 935 ft.lbs. torque (needs lift pumps)
* don't know what I did(my first you tube video posted) but video repeats itself at 4:16 seconds for the remaining 30 seconds or so...*
http://www.youtube.com/watch?v=wq3_unbLXDQ
Dyno sheet
2nd & 3rd pull is on Moonshine level 4 - 478 rwhp 917 ft.lbs. torque
Fourth pull is on the Moonshine level 5 - 484 rwhp 935 ft.lbs. torque (needs lift pumps)
* don't know what I did(my first you tube video posted) but video repeats itself at 4:16 seconds for the remaining 30 seconds or so...*
http://www.youtube.com/watch?v=wq3_unbLXDQ
Dyno sheet
Last edited:
