No. I have a PPE hot+2 on the 05 and the banks big hoss on the lb7. A buddy of mine has a bullydog I wonder if that reads balance rates?
Rough Idle with white smoke???
- Thread starter custom8726
- Start date
No. I have a PPE hot+2 on the 05 and the banks big hoss on the lb7. A buddy of mine has a bullydog I wonder if that reads balance rates?
Nothing, yet
I have been putting additives in every fill up since it started puffing white smoke, It so speratic I don't know what it is. Still have not got it hooked up to a tech-2, just been hoping it will fix itself Sticky injector I hope.
oh yeah, I should mention the idle went back to normal and has not missed a beat since I started running the additives, It just will puff some white smoke for a couple seconds every so often and then it clears back up
i have both PPE and EFI. ppe does not display the info correcty... really as long as the #s are close together your mostlly in the clear.. what i think is that the maybe 3 out of your 6 hole are spraying fuel so all 8 of your injectors are slightly cloged.
if your still worryd about it you pull the #7 injector took me about 4 hours ffrom start to finish including a run to autzone. pull the fender liner and have a 17mm crows foot (best one u can afford) line wrench style. ... i dissassembld the injector nozzle then used wd40 with the red straw and only 2 out of the 6 holes would spray ... i found that B12 worked the best to remove the carbon.
i would post the pics but i cant figure out
if your still worryd about it you pull the #7 injector took me about 4 hours ffrom start to finish including a run to autzone. pull the fender liner and have a 17mm crows foot (best one u can afford) line wrench style. ... i dissassembld the injector nozzle then used wd40 with the red straw and only 2 out of the 6 holes would spray
... i found that B12 worked the best to remove the carbon. i would post the pics but i cant figure out
Motor is coming out for the second time this week on the 05, but this is actually the 4th Duramax motor I have pulled/Replaced thus far..
I hear an odd number of replacement is better than an even... I have actually never heard that but hey best of luck man