Rev limiter

[red1977]

I have searched and could not find anything. How to I tell what my rev limiter is set at in my tunes?

 

[hondarider552]

In ECM tune then rev limiter file

 

[hondarider552]

Also has fueling limiters that control the rev limiter as well. Main injection throttle base quantity.

 

[red1977]

What's the number for the table for rev limiter. I must be blind cause I can't see it lol.

 

[sweetdiesel]

I dont have efi open but its under the speed limter and tire calc iirc

 

[JoshH]

Put it in first or second gear and see how high the RPMs go before it stops increasing. That's the easy way. If you get scared before it stops, you know it isn't low enough for you.

 

[red1977]

Ill give it a try lol. I need a bigger lift pump to.

 

[TLyons90]

Hold her at WOT from 1st to 5th and see where she shifts at :thumb:

 

[duratothemax]

Hold her at WOT from 1st to 5th and see where she shifts at :thumb:

all thats going to tell you is where the shift points are set at in the TCM tune.

 

[red1977]

I still can't find it lol I'm must be blind.

 

[coker6303]

Did you test it like josh said? Do you know what it currently is?

 

[duratothemax]

B0723, B0725, B0726

theres a folder/section right there in the main tune labeled "rev limiter"

 

[red1977]

I used the search on those tables and they are not there and there is no were that says limiter.

 

[Balindir]

Are you sure you are using EFILive?? haha

 

[quinton]

Maybe this will help!

 

[quinton]

Unless you are under a Lbz/lmm tune...

 

[red1977]

Here is a screen shot of my tune and Like I said there is not limiter folder. I search for the numbers that are given and they are not there.

 

[quinton]

Hmm so I guess it's a 2001 or 2002 lb7?

 

[quinton]

Maybe get a 2003 OS and is that instead of yours.

 

[JoshH]

There are other ways to limit RPM besides the RPM limiter tables. Even if they said 5000, that doesn't mean the engine will go that high. The way I told you to find out what it is set at is the most effective way of finding it.