Racing the 05’

[Burn Down]

Dam good passes!

Thank you

you sir, have surpassed my expectations :roflmao: :hug:

but seriously, nicely done buddy!

Thanks James, I do my best to surpass all expectations high or low:coolspot:
It was 16.xx @113mph:rofl: So I thought the Maf issue was fixed threw my spare sensor in it last year and not a peep out of it until I pulled into the staging lanes and the Maf error popped up

Went back to the pits and messed with the sensor plug and wiring, pretty sure it’s the plug. Has not messed up since...

 

[Josh154]

Such good 60’. What’s your tire and suspension setup

 

[Burn Down]

305/50r 20 Proxes ST, fronts 29.5 rear 19 caltracs at 1/2” gap on top spring, rancho 9ks all in on fronts and all the way out on rears, overloads removed from rear spring pack, 3k rpm. Idaho Rob and James have been helping with suspension. I didn’t touch it this weekend and that’s what we stopped with last year. So probably some room to improve. I’d love to cut consistent 1.5xx’s with 20” street tires:spit: Pretty sure all 4 runs were 1.6’s minus my 16 yolo pass.

 

[Chevy1925]

if the track will hold, i bet it could get there. depends on how well they wanna keep that shit prepped for you lol.

you get any launching vids? ill bet there is still some wiggle room left from where we stopped.

 

[Burn Down]

if the track will hold, i bet it could get there. depends on how well they wanna keep that shit prepped for you lol.

you get any launching vids? ill bet there is still some wiggle room left from where we stopped.

I didn’t James. Rob wasn’t there. Maybe next time I can get someone to go down close and get a couple for us.

 

[Josh154]

305/50r 20 Proxes ST, fronts 29.5 rear 19 caltracs at 1/2” gap on top spring, rancho 9ks all in on fronts and all the way out on rears, overloads removed from rear spring pack, 3k rpm. Idaho Rob and James have been helping with suspension. I didn’t touch it this weekend and that’s what we stopped with last year. So probably some room to improve. I’d love to cut consistent 1.5xx’s with 20” street tires:spit: Pretty sure all 4 runs were 1.6’s minus my 16 yolo pass.

Awesome. I’m looking at some 305/50 proxes or 420s now

 

[Chevy1925]

I didn’t James. Rob wasn’t there. Maybe next time I can get someone to go down close and get a couple for us.

10-4 buddy

 

[1TRIKHD]

305/50r 20 Proxes ST, fronts 29.5 rear 19 caltracs at 1/2” gap on top spring, rancho 9ks all in on fronts and all the way out on rears, overloads removed from rear spring pack, 3k rpm. Idaho Rob and James have been helping with suspension. I didn’t touch it this weekend and that’s what we stopped with last year. So probably some room to improve. I’d love to cut consistent 1.5xx’s with 20” street tires:spit: Pretty sure all 4 runs were 1.6’s minus my 16 yolo pass.

I have my cal tracs set with a 1/4" gap between the roller and the leaf pack. Made a few test hits in Mexico the other day. I'll see how they perform this Friday at the track.

 

[Burn Down]

I have my cal tracs set with a 1/4" gap between the roller and the leaf pack. Made a few test hits in Mexico the other day. I'll see how they perform this Friday at the track.

That’s a good place to start:thumb:

 

[Burn Down]

Awesome. I’m looking at some 305/50 proxes or 420s now

Either one seems to work well.

 

[JoshH]

Congrats on the 11 second passes! :thumb:

 

[DAVe3283]

Good times, congrats!

I hope to be out for the midnight drags on June 8. I'd be willing to shoot some high speed video of a launch for you, if the track lights are bright enough for my camera to cooperate.

 

[Burn Down]

Congrats on the 11 second passes! :thumb:

Thank you Josh

 

[Burn Down]

Good times, congrats!

I hope to be out for the midnight drags on June 8. I'd be willing to shoot some high speed video of a launch for you, if the track lights are bright enough for my camera to cooperate.

It’s a deal Dave and thank you.

 

[IdahoRob]

Diesel truck class out at the track this weekend Albert, i'll be racing the truck and the 55. Come on out and play for real instead of playing with yourself....

 

[Chevy1925]

Diesel truck class out at the track this weekend Albert, i'll be racing the truck and the 55. Come on out and play for real instead of playing with yourself....

:rofl::rofl::rofl:

 

[Burn Down]

Diesel truck class out at the track this weekend Albert, i'll be racing the truck and the 55. Come on out and play for real instead of playing with yourself....

:rofl: but playing with myself makes me so happy

 

[Burn Down]

Finally found my MAF error.... Red wire was broken not far from the connector.... To late to go racing today but happy that’s fixed. Also installed my spare crank sensor as I would get a code for that every now and again, old sensor had some metal fuzz on it. Fixing and relooming a/c and coolant level wiring as well, twins, heat and 410k miles have worked the harness pretty good.

 

[1TRIKHD]

Finally found my MAF error.... Red wire was broken not far from the connector.... To late to go racing today but happy that’s fixed. Also installed my spare crank sensor as I would get a code for that every now and again, old sensor had some metal fuzz on it. Fixing and relooming a/c and coolant level wiring as well, twins, heat and 410k miles have worked the harness pretty good.

Glad you finally got that finalized big guy!

 

[Burn Down]

Glad you finally got that finalized big guy!

Ya, 16 @ 113 is a little

Did you run yours yet?