PPE or ATS dual fueler
- Thread starter Evan@InglewoodTrans
- Start date
ATS has a nicer looking bracket and pulley. PPE has a better looking way of routing the hi pressure line on the LLY/LBZ kits. Although the PPE hi pressure line doesn't seem to be as good of quality as the ATS line. PPE has a way better belt routing configuration. On my ATS setup the belt would get stretched after only a few pulls and need replaced.
Good tech :thumb:
i've only dealt with the ppe kit...it went together well the directions sucked but dan cleared anything up for me i've heard nothing good about ats's customer service but can't speak for it myself...
PPE actually has 2 different ways of routing the belt...2 different belts i think though
I was told the PPE kit has a 1:1 drive, and the ATS kit has an overdriven pump!
Is this true?
If so what is the best choice?
Is this true?
If so what is the best choice?
i have ppe and i think its junk. if i had to do over again i would buy ats just soley because i dont like anything ppe makes. mine has thrown the belt off 3 times. one time at over 100mph on the dragstrip and bent the bottom of my 750 dollar cowl hood. i have 2 friends that have done the exact same thing, and i have it shimmed, as do they( even though the instructions dont tell you nothing about it). oh and i have another buddy with a common rail dodge and it did the same thing. when i talked to dan, he pretty much called me a liar and a dumbass and said i didnt install it right. i have no use for him either.
I've also had bad experience with PPE customer service and they didn't really seem to give a sh*t either..half their crap is over priced anyways..
My ppe has worked good except for a hickup with the control box but the kit was missing parts (rail fitting I'm still waiting for it luclly I had a spare one from another rail) Bo belt issues yet ill let you guys know I was originally going ATS for the price but they were on back order. My ppe kit was also very clean an simple to put on :thumb: Fwiw an II kit is just a renamed ppe kit iirc
I have had the ATS kit for about 4 years now. I broke the cp3 mount when i first installed and ATS sent me a new one within the same week no questions asked. Other than that the kit has been flawless. IMHO the pulley looks better than the PPE kit. I like the braided hoses that the ATS kit comes with but they will rub through anything they rub on. I just wrapped them and they are ok now.
I've been running the PPE kit since it first came out, and have had pretty good luck with it.
The only time I had belt issues was when I had runout on the crankshaft pulley, after replacing the harmonic balancer, no more problems.
The only time I had belt issues was when I had runout on the crankshaft pulley, after replacing the harmonic balancer, no more problems.