Paul Vasko's new Dmax RailCar makes its Debut Technical info Thread!

[MarkBroviak]

Sounds like a lot, but I have zero clue. How much are the guys spraying that run the blue S&S sponsored car?

I wouldn't have guessed it would run that hot at that AFR

I don't know but I'm sure it is more than we are!

 

[1FastBrick]

Correct! We are already spraying somewhere around 5-6lbs in 4seconds.... We are running and air fuel ratio from 25:1 all the way up to 50:1 during the pass. The next phase of this build is going to be a LOT different to try to allow us to manage the heat at this high of a hp without injecting water. I can tell you we are going from 4" to 5" plumbing and the water to air intercooler is going from a 2000hp to a 4000hp core setup and we are also switching it from single nozzle kits to direct port nitrous setup. We are also going from manifold to long tube headers which should help also.

Interested to see how it turns out.

 

[MarkBroviak]

Well it is alive and kicking! Just fired it up for the first time today remotely with the help of Andre from S&S with the new combo. Here is a link to what it looks like with the new heart transplant in it and some other go really fast mods that the chassis needed to keep Paul safe.

Precision Chassis, Inc. | Pottstown PA

Precision Chassis, Inc., Pottstown, Pennsylvania. 19,671 likes · 120 talking about this · 462 were here. Race Car Fabrication

www.facebook.com

Hopefully we will get it up on the brake tomorrow and take it to the track July1 for first test passes with it. Fingers crossed we get right back to where we left off with it and continued moving forward.

 

[MarkBroviak]

Well, sorry for the delay on this but would you guys like me to do a full write up of what it took for us to run the first diesel 5second pass in the 1/4mile? Let me know!

 

[2004LB7]

Well, sorry for the delay on this but would you guys like me to do a full write up of what it took for us to run the first diesel 5second pass in the 1/4mile? Let me know!

You really have to ask?

 

[DAVe3283]

Heck yes, we want to know all the gory details!

Sent from my FlashScan V2 using Tapatalk

 

[1FastBrick]

Well, sorry for the delay on this but would you guys like me to do a full write up of what it took for us to run the first diesel 5second pass in the 1/4mile? Let me know!

Speaking of, What happened to your rig?

 

[MarkBroviak]

Speaking of, What happened to your rig?

It's still in my possession technically and is currently under the knife as we speak to update it so we can go faster with it!