Part number needed: Van Thermostat Housing
- Thread starter IOWA LLY
- Start date
ACDELCO Part # 1580774 {#97222428, 97383583}
what i got off rock auto might want to confirm its correct though
what i got off rock auto might want to confirm its correct though
A Duramax part that is expensive!!!?? Say it aint so!
The dealer looked one up for a 2004 van and said the pic looked just the like the truck one so he wasn't sure it was right. He quoted me $88.
Anybody got a used one?
A Duramax part that is expensive!!!?? Say it aint so!
The dealer looked one up for a 2004 van and said the pic looked just the like the truck one so he wasn't sure it was right. He quoted me $88.
Anybody got a used one?
04 van isnt going to be a dmax. 1st dmax van was 06 i think.
gmpartsdirect lists 2 different ones, option 1 and option 2
What about blocking the hole on the outlet, and make a new hole on the top? I was looking into doing this for the drag truck! If the fitting on the top is the right angle, the stock hard line can be turned sideways and re used.
Im trying to picture what your talking about but having a hard time.
Heres the only pic of a van housing I can find
Attachments
Guys, Henry has them listed on his website.....for a decent price, too. http://creaturesofthenightperformance.com/LBZ-Van-Bridge-P284654.aspx
Ive been wondering if you could take that bridge and match it up to a standard LB7 I/C cold pipe with a simple elbow?
http://creaturesofthenightperformance.com/LBZ-Van-Bridge-P284654.aspxIve been wondering if you could take that bridge and match it up to a standard LB7 I/C cold pipe with a simple elbow?
Last edited:
Thats funny! I had never seen a Van housing, but thats exactly what I was saying to do. I was thinking parallel with the front of the motor with the stock hard line though.
Guys, Henry has them listed on his website.....for a decent price, too.
Ive been wondering if you could take that bridge and match it up to a standard LB7 I/C cold pipe with a simple elbow?
lol that is the LBZ Van Bridge they are looking for the Van Thermostat Housing
ChristAlmighty I think I have dementia....I read that as Bridge. WTF am I thinking? Wonder if I have dyslexia?
Sorry guys. I am an idiot.
I'll bet you anything Henry can get one of the van Tstat housings, though.
Sorry guys. I am an idiot.
I'll bet you anything Henry can get one of the van Tstat housings, though.
Last edited:
At over 300 bucks foe the setUp I'm thinking it would
be better to mod the
stock unit and use the metal flex rad
hose. I could b wrong but
it don't looklike a good fit with the second cp3 either
be better to mod the
stock unit and use the metal flex rad
hose. I could b wrong but
it don't looklike a good fit with the second cp3 either
I would have to hit the dealer up and look up the part in the computer to get the right part number. But the hose from are truck will nut work you would need a flex metal setup from summit racing or jegs. If you haveca part number I can give you a rough price if it's the right part.