So I just ordered new wheels (finally) and I was curious if there was preference for new TPMS. Mine are wonky so I am just going to get new ones. Any personal favorites?
Question: Ordered Wheels, TPMS?
- Thread starter wilrob
- Start date
My favorite is none. I bought some off a member and never even ****ed with getting them programmed, that way I have one warning and not 5.
Yeah only 2 of mine work now, but having orange on the dash kills me inside a little.
Wells sounds like I should take your advice then. $45 bucks a pop isn't so bad after buying wheels
I'll keep this in mind, I'm gonna talk to Discount to see if they will throw me a bone on them since I bought tires through them. Do you have a part number on those sensors?
Last edited by a moderator:
I used some off eBay that were like $120 shipped and they lasted about 6 years before one went out.
What kind of tires are you going with? If they are not able to hold the factory recommended PSI then you are going to have to also pay to get them reprogrammed to a lower PSI rating. Long story short your light will still be on whether you have them in their or not depending on the PSI in your tire without redoing the programming. If that at all made since...
I am not 100% sure. I know on my current truck my light comes on with the fronts at 45 psi and the rears at I think 60psi.
The pre 2015 trucks I believe that method and the GM tool it can be done with just that and being near the TPMS sensors themselves. Easy and cheap. On my dang truck you actually have to get into the BCM and reprogram them from what I have been told...
Well I ordered 420s so max is ~ 55 psi IIRC. Ill just take it in and have them adjust the range.
:thumb: don't let them tell you they can't do it. That's usually always thier first comment.
