Nos Bottle direction

[sweetdiesel]

How important is the direction and placement of the bottle?

Reading the instruction it says place bottle with valve facing to the front of the truck but we would like to place it side to side for mounting purpose

would it be ok to place it side to side?

 

[JoshH]

Just remember, nitrous is a liquid. If you are running low, it could slosh away from the pickup tube if it isn't mounted with the valve toward the front, but I probably wouldn't worry too much about it.

 

[sweetdiesel]

Thanks Josh

 

[wikdlmm]

Simon mine is towards the cab right by my stack for extra heat. But I doubt the direction would matter

 

[MMLMM]

Wouldnt matter unless it was super low. the angle is more critical than anything....

 

[gmduramax]

My valve is facing the tailgate. I have gotten it as low as 2lbs left in it, with a bottle heater.

 

[Lonnie]

If you mount it sideways, just rotate the bottle slightly (about 30 degrees), so the internal pickup tube is pointing rearward (instead of down) to better pick-up the nitrous in the bottle under acceleration.

 

[Stingpuller]

Bottle

Yep want Lonnie said. Should work fine. Simon are you getting a fix???

 

[Redbowties88]

subscribed

 

[sweetdiesel]

Yep want Lonnie said. Should work fine. Simon are you getting a fix???

I installed a 50 jet pre intercooler to help speed up spooling. I had no intentions of using it after the turbos where spooled but I can see how people get addicted to it

it has a bottle heater with it to... Real nice kit with a controler but we just rigged it up to the horn to aid in spooling

 

[bigbird]

Cheater

 

[Stingpuller]

Nitrous

A .050 mite be a bit much for spooling. That will hit pretty hard. Simon's a junkie!!!!! :hug: It's all good. Did I say Simon's a junkie!

 

[paint94979]

A .050 mite be a bit much for spooling. That will hit pretty hard. Simon's a junkie!!!!! :hug: It's all good. Did I say Simon's a junkie!

LOL he told me the other night, "Its F**KIN WICKED!!! every time i hit the horn I get another 200rpm"

 

[LBZ]

LOL he told me the other night, "Its F**KIN WICKED!!! every time i hit the horn I get another 200rpm"

:rofl:

I think I'd jet down a bit Slim - don't want to risk walking through the brakes!

 

[hondarider552]

Reviving this thread, I am also looking to do this, does placement of the jet have to be where Simon installed his? Or can it be in the intake pre turbo, or, does not matter ?

thanks. Ordered the Y for my nitrous line and got another solenoid coming from Steve :happy2:

 

[Stingpuller]

Nitrous

In front of the turbo will work fine. Depends how many stages you run but the longer the distance the better it is. It hits softer but gives it more time to cool the charge.

 

[hondarider552]

Will be running the single stage to spool and my ZEX TPS for the second. Probably will not use the first stage after I leave the line

 

[JoshH]

Will be running the single stage to spool and my ZEX TPS for the second. Probably will not use the first stage after I leave the line

:roflmao: That's a funny joke, Brian.

 

[paint94979]

:roflmao: That's a funny joke, Brian.

Haha

 

[Chevy1925]

:roflmao: That's a funny joke, Brian.

:rofl::rofl: Exactly cause thats not what i was told on the phone :roflmao: