New mods for this year drag racing?

[ecc_33]

So whats everyone doing for this season. I know its alittle late but im bord soooo. I am in the process of putting the transfer case back in after the pump rub kit. Installed a labonte water meth kit. Installing 2 new gauges autometer NV series 60 psi boost and 2000* pyro Mike L tranny cooler Also bought head studs. And am going to go back to 3.73 gears some time this year:roflmao: Might even take out the E locker I think thats it lol. Oh got the 2.6 cover machined out to a 3.0 like it should be and polished t he cover while it was off for some bling bling. I think I will try and strip some weight while im at it cause my truck is a PIG at 7000 lbs.

 

[custom8726]

Why would you be taking the E-locker out?

 

[duramatt05]

Just had to do headgaskets and had a cracked head so that slowed things down. But did a diamond eye downpipe, afe turbo mouthpiece, ppe shim kit, egr blocker. Hopin to get efi live, lift pump and probly gonna fab up some traction bars. Nothin big but gettin ready for the good stuff. I havnt actually had the truck at the strip yet. But hopin to make a couple trips this year

 

[RENODMAX]

Pump rub kit, S366, new custom dual exhaust, new intake and eventually going to chassis saver everything.

 

[Righteyeblind]

New turbos, internal engine parts, trans, converter, lift pump, gauges....Everything I have dont to my truck over the last 5 years is gone. Should of started with a built motor I guess

 

[TheBac]

Drag radials Losing 10lbs a corner is good.
Driveshaft loops/Ujoint shield
Wastegate
Adjustable rear shocks
Rollpan


I also will try to do a better job of driving.

 

[duramaxgirl<3]

secrets :hug:

 

[ecc_33]

Why would you be taking the E-locker out?

No more sled pulling for me.... And I don't use it drag racing. If I don't have the 4.56 gears than I won't pull anyways soooooo

 

[custom8726]

No more sled pulling for me.... And I don't use it drag racing. If I don't have the 4.56 gears than I won't pull anyways soooooo

P.M. me after you get it out if you decide to sell it I might take it off your hands

 

[Evan@InglewoodTrans]

S472
60 overs
caltracs
And some weight reduction

 

[jaketbs]

Cheetah 68mm sould b installed in about a week
Drop it down a couple inches
hopefully some caltracs
make my first few passes on the track to see where im at

 

[ocwelder]

Puttin the stock keys back in, QA1's all 4 corners, puttin her on a diet, lighter wheels with 29" cheaters... maybe?

 

[RENODMAX]

Oh ssbc rotors and ebc pads too

 

[delong_1]

new and improved motor( might even put the pistons in the right way ), new turbos, bigger lift pump, etc....

 

[JD4440]

Headstuds, a little less weight, may still do up-pipes, and depending on when it's paid off maybe twins (even though the track will be closed by then, lol)
If the money was there I'd like to swap out the TTS pumps and Nicktane for a Hellman sump and an Airdog II DF-200

 

[05chevy]

Electric fans, bigger trans cooler, castflows and up pipes, airdog 2, qa1's in the rear

 

[GeorgiaDuramax]

s464, head studs, modified lift, new ball joints and tie rod ends

 

[Noreaster]

dual taurus fans & replacing the rest of the hard brake lines

I just need to put in some time at the track & get consistent launching

 

[jmaz268]

New HTT turbo, new sway bars all around, tires and rims, new profab castflows.

 

[MD-Dmax]

new motor with a big set of dts twins, qa1s all around, ditched the traction bars for caltracs, a set of drag radials and going on a diet might even have to put a cage in it