Need some pics

[dracing70]

Ok fellas here is what i need. I posted about this before and i received plenty of help. However im not completely satisfied with my setup. I installed a twin pump setup that i purchased from someone and im not sure if it has been altered a little or not but I notice my second pump sits much higher than most and my belt is a lot longer than the belt most people utilize. So with that said i was just wondering if some members with their twin pump setups could send me a pic of their belt routing so I can compare and change accordingly. IM only looking for pics of systems that still utilize the ac compressor also. Any effort is extremely appreciated.

 

[joegorby]

Dual Fueler Installation Guide 2004.5-2005 LLY

 

[custom8726]

Not sure if this helps but the best one I have on the computer..

 

[dracing70]

yeah im looking for one with the entire belt path. I believe mine has one too many extra pulleys. Yours is another example of how much lower most pump setups sit compared to mine. my belt seems to be about 8-10 inches longer than the standard belt everyone uses which is 061360. Thank you for the pic though.

 

[joegorby]

yeah im looking for one with the entire belt path. I believe mine has one too many extra pulleys. Yours is another example of how much lower most pump setups sit compared to mine. my belt seems to be about 8-10 inches longer than the standard belt everyone uses which is 061360. Thank you for the pic though.

Did you look at the installation instructions I posted? It show's the entire belt route

 

[dracing70]

Did you look at the installation instructions I posted? It show's the entire belt route

i missed it on my first run through but after looking at it the blanks are definitely filled in. I have tried the routing in the pics before however had issues with the oil fill. I need to either mod mine or buy the shorter one. with that belt path the 061360 fits perfect. Am I correct in assuming the shorter the belt the better? less drag and less room for failure?!!! Thank you very much for the responses.

 

[dracing70]

who offers the shorter oil fill spouts individually, just in case i dont want to fab a new one?????????? it looks like a oil spout for a topkick.

 

[custom8726]

who offers the shorter oil fill spouts individually, just in case i dont want to fab a new one??????????

PPE I believe will sell you there stubby billet oil fill..

 

[joegorby]

You can get one from PPE.

 

[dracing70]

i checked on it via their site and unless i missed it, i did not come across one. i will either fab a new one or use one from a topkick. thanks for all the effort and info.

 

[05_LLY]

I beleive the shorty filler is from a med duty dmax IIRC?

 

[joegorby]

i checked on it via their site and unless i missed it, i did not come across one. i will either fab a new one or use one from a topkick. thanks for all the effort and info.

You have to call and ask them. They'll sell individual pieces, I did it once for a pulley I needed out of their kit

 

[dracing70]

I beleive the shorty filler is from a med duty dmax IIRC?

correct a topkick with the lly duramax engine utilizes the shorty oil fill spout due to clearance issues with the intake manifold and intetrcooler plumbing.

 

[ripmf666]

Also used in the first run of the Dmax vans. I have the tube on my price list from ppe think I might have a spare also.

 

[sweetdiesel]

just get creative and you can run any belt.


pm mat larson he is a wiz at that stuff:thumb:

 

[ripmf666]

This is for a 06 Lbz

 

[dracing70]

just get creative and you can run any belt.


pm mat larson he is a wiz at that stuff:thumb:

That is what I did. I can make it work without running a shorter oil spout, however my current belt is extremely long and I figured that shortening it up was probably a safer and more efficient idea. Would u agree??