My new setup/motor

dmax711

dmax711

New member
Mar 4, 2011
1,057
0
0
concord, north carolina
My intercooler cores I get locally from my friends machine shop that makes radiators and gets the cores pretty cheap.. now these o rings in the block aren't like what you guys are thinking, the heads don't have a groove machined in them like what some other guys do. Just the block.
 
Jackblack99

Jackblack99

New member
Oct 18, 2012
270
0
0
Nowhere
Yea i know how fire ringing works. I work at Haisley Machine. We machine fire rings in just heads all the time. And we can do them in just the blocks if that's what the customer wants. But I just didn't think that a FIRERING would work good on an aluminum head. Is this O-Ringed? Machine thin, .020 grove in the block, press in steel wire and use stock gasket?
 
dmax711

dmax711

New member
Mar 4, 2011
1,057
0
0
concord, north carolina
Hey I'm just making sure man. And that's sweet you work there u guys do great work. And yes to your last statement. Sorry for the short answers I'm replying from my phone.
 
Jackblack99

Jackblack99

New member
Oct 18, 2012
270
0
0
Nowhere
It's all good man. I figured it was an O-ring instead of a fire ring. But the groove looked kinda big that's why I asked if it was Fire ringed. Fire rings use a modified stock gasket and have a think diameter steel wire. But it shouldn't work in the aluminum heads. The steel wire would screw up the head.
 
dmax711

dmax711

New member
Mar 4, 2011
1,057
0
0
concord, north carolina
Finally got around to welding up a cp3 bracket, Im deleting the valley one and running a modded pump where the 2nd would normally go.
download
 
dmax711

dmax711

New member
Mar 4, 2011
1,057
0
0
concord, north carolina
Finally finished and installed the new motor, been running awesome and can't wait to dial in the tuning! A few people that I'd like to give a shout out to for helping/ providing parts are my brother Andrew @ sun coast. Steve @ ssdieseltuning . Industrial injection. And Evan for his awesome tech support hotline.
 

Attachments

  • IMG_20131122_103925.jpg
    IMG_20131122_103925.jpg
    208.4 KB · Views: 108
  • IMG_20131122_104009.jpg
    IMG_20131122_104009.jpg
    199.6 KB · Views: 98
  • IMG_20131122_103827.jpg
    IMG_20131122_103827.jpg
    203.4 KB · Views: 92
Evan@InglewoodTrans

Evan@InglewoodTrans

yerp
Vendor/Sponsor
Aug 5, 2010
3,118
65
48
40
Western MA
dmax711 said:
Finally finished and installed the new motor, been running awesome and can't wait to dial in the tuning! A few people that I'd like to give a shout out to for helping/ providing parts are my brother Andrew @ sun coast. Steve @ ssdieseltuning . Industrial injection. And Evan for his awesome tech support hotline.
Click to expand...

Looks awesome :woott: The tech support line is always open :D
 
You must log in or register to reply here.
Top Bottom