my motor build and triples!
- Thread starter quadracer37
- Start date
I have to agree with you that inertia dynos do suck for turbo vehicles. I made a whole 414hp at 19lbs of boost on one in the spring. I'm looking to run my truck on a dyno with a load cell
forgto to answer back, dont get on much sorry
yes, 2 much smaller wheels and housings VS. one large turbine and housing.
ill be going back to the dyno oct 15th, the same one that i made 900 on last time. so we'll see what it does then.
yeah, haha in remembrance of the schieds afterparty '11 haha
im on face book :roflmao:
thanks! :thumb:
here is what my two nights before schieds consisted of;
water pumps do not like 4200rpm!
i recommend welding yours if you plan on building a motor!! was hearing a weird noise from the front of the engine for a few days, but temp guage was fine and it never ran hot. after cutting open my oil filter and finding it full of metal we tore into it to find that the gear had been rubbing on the block for a little while.
pressed it back on and TIG welded it because it was 11pm and no auto parts open. so got it back together and did a few hot laps at 1am and did this;
stock IC boots dont like 95lbs apparently. luckily my buddies pull truck is only a few doors down and he happens to have every spare part i need when i break my truck lol
yes, 2 much smaller wheels and housings VS. one large turbine and housing.
ill be going back to the dyno oct 15th, the same one that i made 900 on last time. so we'll see what it does then.
yeah, haha in remembrance of the schieds afterparty '11 haha
im on face book :roflmao:
thanks! :thumb:
here is what my two nights before schieds consisted of;
water pumps do not like 4200rpm!
i recommend welding yours if you plan on building a motor!! was hearing a weird noise from the front of the engine for a few days, but temp guage was fine and it never ran hot. after cutting open my oil filter and finding it full of metal we tore into it to find that the gear had been rubbing on the block for a little while.
pressed it back on and TIG welded it because it was 11pm and no auto parts open. so got it back together and did a few hot laps at 1am and did this;
stock IC boots dont like 95lbs apparently. luckily my buddies pull truck is only a few doors down and he happens to have every spare part i need when i break my truck lol
