LB7: Making my truck to handle better?

Bustedknuckles

Bustedknuckles

Honey Badger
Sep 25, 2010
1,308
2
38
33
Hagerstown MD
What are my options to improve the handling on my 04 ccsb duramax? It leans like crazy on turns that my buddies cummins and powerstrokes go around like they're on rails. Has anyone installed a aftermarket rear sway bar or anything else? I have brand new bilstiens all the way around and the torsion bars are cranked up some. I'm not looking for sports car handling, just a decent improvement.

P.S. I will not lower it.
 
JoshH

JoshH

Daggum farm truck
Staff member
Vendor/Sponsor
Feb 14, 2007
13,712
773
113
Texas!!!
I have a rear sway bar that used to be on my truck. It made a huge difference it body roll.
 
jmaz268

jmaz268

Lead from the Front
May 20, 2010
2,895
0
0
41
Springfield IL
Hellwig and Fredericks both make one. I have the Hellwig front and rear, noticed alot from the rear, not so much on the front.

I did all new rubber for energy suspension too.
 
Chevy1925

Chevy1925

don't know sh!t about IFS
Staff member
Oct 21, 2009
21,664
5,812
113
Phoenix Az
Bustedknuckles said:
What are my options to improve the handling on my 04 ccsb duramax? It leans like crazy on turns that my buddies cummins and powerstrokes go around like they're on rails. Has anyone installed a aftermarket rear sway bar or anything else? I have brand new bilstiens all the way around and the torsion bars are cranked up some. I'm not looking for sports car handling, just a decent improvement.

P.S. I will not lower it.
Click to expand...

lower it back to stock and it will corner much better. has to do with working angles of the UCA and LCA when corning. sway bars will help but will make your ride a bit stiffer as well.
 
Bustedknuckles

Bustedknuckles

Honey Badger
Sep 25, 2010
1,308
2
38
33
Hagerstown MD
I think I'm gonna order a rear sway bar, Thanks guys! Btw I'm not sure what's up with the funky wording of the title, maybe typing while driving had something to do with it. LOL
 
JoshH

JoshH

Daggum farm truck
Staff member
Vendor/Sponsor
Feb 14, 2007
13,712
773
113
Texas!!!
Kspen90 said:
So its not true that putting one on the back without upgrading the front will upset the vehicle making it more prone to spin out as per hellwigs website?
Click to expand...
Mine never spun out or even came close. I'm not going to say what they put on their website is false, but as long as a crew cab truck is, I think you would have to be doing something pretty dumb to spin out in it.
 
JoshH

JoshH

Daggum farm truck
Staff member
Vendor/Sponsor
Feb 14, 2007
13,712
773
113
Texas!!!
arneson said:
Define the word dumb??? Cause they drift and spin out easy with twins. Lol hard to believe that a rear sway bar would to that tho.
Click to expand...
What I'm saying is, unless you are a total jackass, they are hard to spin out on accident. I have had twins and all that too (ran an 11.13 in a full weight truck with the tune that I daily drove). I know how they can get out of shape when you're driving them hard, but if you even half way know how to drive, they're pretty easy to keep from swapping ends.
 
rickettzusaf

rickettzusaf

New member
Nov 30, 2011
276
0
0
Goldsboro, NC
20's help some too. Had 20x10's with 285/55 dune grapplers with stock height suspension and it handled about the same as my truck now with it lowered 3/6 and 265/70r17's.
 
You must log in or register to reply here.
Top Bottom