lowered truck pics

[David Burton]

Let me post a couple of dropped Tahoes here

And here's where I've taken them if you want pictures from different angles
https://www.carid.com/gallery/chevy/tahoe/

 

[Rivera.alan]

Where are you guys getting the 3 inch drop shackles ?? Thanks !

I got 3" drop shackles from belltech

 

[Miguel_in_Denver]

I got 3" drop shackles from belltech

Thanks man

 

[anthonyking166]

Does anyone have the t bolts out and the overload spring removed? Just curious to see how it looks

Sent from my SM-G955U using Tapatalk

 

[1TRIKHD]

Does anyone have the t bolts out and the overload spring removed? Just curious to see how it looks

Sent from my SM-G955U using Tapatalk

Mine are.

 

[anthonyking166]

Mine is

Have any pictures?

Sent from my SM-G955U using Tapatalk

 

[1TRIKHD]

Have any pictures?

Sent from my SM-G955U using Tapatalk

Go to the gallery in the forum section and look at my thread. Country boy limo

Sent from my VS985 4G using Tapatalk

 

[anthonyking166]

Go to the gallery in the forum section and look at my thread. Country boy limo

Sent from my VS985 4G using Tapatalk

I like it! Now you said something about the center pin? What's up with that

Sent from my SM-G955U using Tapatalk

 

[1TRIKHD]

I like it! Now you said something about the center pin? What's up with that

Sent from my SM-G955U using Tapatalk

You will need to get a shorter one. The one that's in there now isn't threaded all the way up to the top of the alignment pin. I just went to ave hardware and got a grade 8 bolt that was shorter and a nut to go with it.

 

[lutzjk913]

How bad was it to remove the overload and how much drop it give you?

 

[NC-smokinlmm]

Let me post a couple of dropped Tahoes here

And here's where I've taken them if you want pictures from different angles
https://www.carid.com/gallery/chevy/tahoe/

Are you lost?:spit:

 

[Rivera.alan]

Are you lost?:spit:

:roflmao:

 

[Deny]

Hi does any one know what is thr most positive ofset one can get for a 2500 4x4 lowered 3 5 thanks Denis

 

[Novak]

Hi does any one know what is thr most positive ofset one can get for a 2500 4x4 lowered 3 5 thanks Denis

Depends on wheel size


Sent from my iPhone using Tapatalk

 

[Novak]

Are you lost?:spit:

When you have a paint shop with no customer base and your looking to write some sh*t off....


Sent from my iPhone using Tapatalk

 

[Deny]

Novak i plan on getting 20 the reason i want lots of positive on the wheels is because i am building a 55 chevy on a dmax frame and the front need to go in as much as i can. the 2500 was lowered 3 in the front and 5 in the back this brought the front wheels out. i would need something like plus 80 been looking but cant seem to find anything with big positive offset. any help would be appreciated













thanks Denis

 

[OregonDMAX]

Most stock wheels are positive offset most aftermarket wheels are negative. You aren't really going to find more than a +24 positive

 

[Dozerboy]

Even at that you can start rubbing things on the frame etc pretty quick with wide tires.


Sent from my iPhone using Tapatalk

 

[Novak]

So ultimately you want them sucked in like a rat rod? The reason I asked wheel size is because the calipers and brake are 16” until 07.5’ and then they moved to 17”
The stock wheel size (on WT/LT 07.5’) was a 17” +10 offset
I’m running my winter wheels and they are 17” +18 offset and I had to reroute my wheel speed sensor lines because the gap between the wheel and the spindle was that tight something like 3/8”
Keep in mind that what you’ll need to clear is your spindle at anything over +20 so I would measure your spindle and see how big of a wheel you need to go over that.



Sent from my iPhone using Tapatalk

 

[Novak]

Brock is right though on finding anything more than +24
That’s gonna be a custom built set if it’s even possible

Where did you figure +80?


Sent from my iPhone using Tapatalk