Info: Lowered Dmax's......PIC's ONLY!

marcusrushing90

Mike L wants my body
Nov 26, 2010
162
0
0
With Mike L and his wife
My truck has ready lift 2 in leveling kit. And it constantly eat's front end parts. So im thinking of lowering it to get rid of the headache. Im going to drop the T-bars down and put drop shackles in the rear. Just want some pics to see what its going to look like and if i even want to do it.
 

THEREDDEVIL

A Bad seed
Jul 28, 2010
512
0
16
44
Godfrey, il
Wish I had some better pics, mine is tbars down, 3" drop shackle. On 285-60-18.
IMG_1231.jpg
 

MOJO

New member
Jul 8, 2009
166
0
0
IN
I have 285/70/17 BFgs ATs I would like to lower mine down to but my front rubs:( How did you get away with lowering yours :confused:
 

Mike_S

OOPS!
Nov 18, 2009
803
0
0
40
Idaho
Its all in the wheel you choose. I have my torsion bars completely down, and the overload and intermidiate spring removed from the reear leaf pack, makes for abut 4" of drop, and i run 285/75r16 tires on stock wheels. No rubs at all. I will be running 20s soon, and i will be running a 285/55r20, hopefully with similar results. Ill try to get some pics up for you later.
 

Redbowties88

Sideways > Straight ;)
Aug 24, 2009
1,943
1
0
609 New Jersey
the 2 in the parking garage are 2-3" higher in the front then normal. i crank the bars back up in the worst winter months
 

Attachments

  • dmaxvette.JPG
    dmaxvette.JPG
    440.1 KB · Views: 81
  • garage truck 2.jpg
    garage truck 2.jpg
    38.4 KB · Views: 87
  • lowdmax1.jpg
    lowdmax1.jpg
    61.1 KB · Views: 102
  • garage truck civic 2.jpg
    garage truck civic 2.jpg
    41.9 KB · Views: 62

marcusrushing90

Mike L wants my body
Nov 26, 2010
162
0
0
With Mike L and his wife
I got 305/70R16's stockers. I know if i lower it in the front its going to rub. But will i have problems in the back if i put the shackles in? Cause thats the route im leaning towards.
 
Last edited:

Mike_S

OOPS!
Nov 18, 2009
803
0
0
40
Idaho
Mike. What width and offset are you going with on your 20's?

Hey Beech, Is your turck stock height in the rear?

Ill measure them this afternoon. Im not sure a hundred percent if my plan will work out, but so far it looks promising. Measurements to come. :thumb:
 
Oct 16, 2008
948
12
18
Idaho
Its all in the wheel you choose. I have my torsion bars completely down, and the overload and intermidiate spring removed from the reear leaf pack, makes for abut 4" of drop, and i run 285/75r16 tires on stock wheels. No rubs at all. I will be running 20s soon, and i will be running a 285/55r20, hopefully with similar results. Ill try to get some pics up for you later.

Are you running caltracs to stop spring wrap without the extra leafs? I've been debating pulling a couple out but don't want to have bad spring wrap without caltracs.
 

THEREDDEVIL

A Bad seed
Jul 28, 2010
512
0
16
44
Godfrey, il
I have 285/70/17 BFgs ATs I would like to lower mine down to but my front rubs:( How did you get away with lowering yours :confused:

I was running 285 70 17 bfg a/t to pull with, I sold them and will run a 285 75 16 very soon. I ran 35x12.5x18's for 2 years and had to trim a bunch. I think that's how I get away with 285's not rubbing.
 

Mike_S

OOPS!
Nov 18, 2009
803
0
0
40
Idaho
Are you running caltracs to stop spring wrap without the extra leafs? I've been debating pulling a couple out but don't want to have bad spring wrap without caltracs.

Not yet, but i will be building some trac bars soon. If you dont want to Have to run trac bars, do not remove any leaves, spring wrap and wheel hop is pretty bad in my setup right now. For the time being, im just being nice with the skinny peddle.
 

'03duramax

I love cheer******s
Sep 16, 2006
190
0
16
WA
Anyone know if 20X10 wheels can work with the t-bars cranked down? I was thinking maybe on a 285 tire. I found a really nice set of KMC's for cheap.
 
Oct 16, 2008
948
12
18
Idaho
Not yet, but i will be building some trac bars soon. If you dont want to Have to run trac bars, do not remove any leaves, spring wrap and wheel hop is pretty bad in my setup right now. For the time being, im just being nice with the skinny peddle.

Thanks for the info. Skinny pedal self control isn't my strong suit. Gonna have to wait until I have time to build some traction bars.
 

Redbowties88

Sideways > Straight ;)
Aug 24, 2009
1,943
1
0
609 New Jersey
Thanks for the info. Skinny pedal self control isn't my strong suit. Gonna have to wait until I have time to build some traction bars.

definitely, ive driven mine with the bars out for painting and damn the axle wrap is terrible. i really thought i was gonna break something when i went to pass a guy at like half throttle
 

Righteyeblind

Member
Aug 29, 2008
712
0
16
Fairbanks, AK
Anyone know if 20X10 wheels can work with the t-bars cranked down? I was thinking maybe on a 285 tire. I found a really nice set of KMC's for cheap.

Depends what the offset is. If you want to fit a bigger tire on a stock suspension truck stick with a positve offset wheel. The KMC wheels you are looking at are probably a -12 so they will stick out and might rub on the bumper.
 

'03duramax

I love cheer******s
Sep 16, 2006
190
0
16
WA
Depends what the offset is. If you want to fit a bigger tire on a stock suspension truck stick with a positve offset wheel. The KMC wheels you are looking at are probably a -12 so they will stick out and might rub on the bumper.

Thanks man. I'm not looking to go bigger than stock. I am thinking 285/50's which are about 31", so hopefully I'll be okay. I'll check the offset though.
 

Devon

broke my curse
May 2, 2010
807
0
0
Hinsdale ma
Here's a few, 3" lowering shackles,no overloads, and torsion bars dropped all the way down in front. Sitting on 20x10 xd monsters -12 offset and a 5" bs


Sent from my iPhone using Tapatalk
 

Attachments

  • ImageUploadedByTapatalk1311720284.381966.jpg
    ImageUploadedByTapatalk1311720284.381966.jpg
    44.3 KB · Views: 101
  • ImageUploadedByTapatalk1311720343.033905.jpg
    ImageUploadedByTapatalk1311720343.033905.jpg
    32.6 KB · Views: 126
  • ImageUploadedByTapatalk1311720389.919115.jpg
    ImageUploadedByTapatalk1311720389.919115.jpg
    30 KB · Views: 102
  • ImageUploadedByTapatalk1311720515.732996.jpg
    ImageUploadedByTapatalk1311720515.732996.jpg
    46.9 KB · Views: 115

Fingers

Village Idiot
Vendor/Sponsor
Apr 1, 2008
1,715
86
48
White Oak, PA
Oh hell guys, That ain't nothin.


375/50 -16s on her now 365/60s on her in the pic.

No crank no lift
 
Last edited: