Lockup

[LBZrcks]

Does anyone know where to get a lock up controller from Ben?

Mike L

 

[paint94979]

Mike L

Mike L. had 2 in stock as of 1.5 weeks ago

 

[LBZrcks]

Mike L. had 2 in stock as of 1.5 weeks ago

Hopefully he still does, I need to buy one

 

[juddski88]

correct.

I don't want to speak for anyone but the way I read the funks post was if he gets Bens new controller his lockup issues will be solved.

 

[coker6303]

The 6 speeds seem to have a fair bit of trouble locking up as the power grows , but a few simple tests can check to make sure the converter is stalling at the right speed , brake stall the truck up and see what rpm its pulling through the brakes .

With my 478hp tune, I can literally stand on the brake and throttle and truck will hold at 2200-2300 rpm.

I will play more later to verify.

Sound right for the ML?

Sent from my ADR6400L using Tapatalk

 

[616samuel]

sorry to ask, but how do you notice that you are unlocked till 4th gear? is there a way you can log converter lock-up via efilive? or is it rpm drop at shifts the way to tell?

I too have a ML converter in my tranny.

 

[coker6303]

You can log it with EfiLive but you can also feel the difference

Sent from my ADR6400L using Tapatalk

 

[Dirtymaxx03]

my shit doesnt lock either and it causes it to hang in 4th till i let out and get back in it. i need one of those boxes

 

[coker6303]

One dead give away that I've noticed is if you are in tow haul and make a wot pass and the converter didn't lock properly, when you let out of the throttle the converter remains unlocked until you register more than 0% throttle.

If the converter does lock properly in tow haul on a wot pass then it remains locked when you let out and go to 0% throttle to begin engine braking and downshifting like tow haul should.

Just what I've noticed playing around...

Sent from my ADR6400L using Tapatalk