ok, new to this forum and really need some help. i recently replaced all 8 injectors on my 02 lb7, bought a kit from Pensacola diesel that included the injectors, injector cups, all gaskets and new high pressure injector lines. after getting all back together i primed the truck twice and it fired up, had some black smoke but seemed to run fine, then went to take it for a test drive and it quit after putting some load on it. blew white smoke and stalled, havent been able to get it going since. noticed my supply and return lines on the drivers side had kinked, tried to rule out anything from there back by disconnecting those lines and running clear lines into a fuel can and no go. im not getting any codes either.......please give me some insight