Up again....
Catman, did you have to modify any crossmembers or run a different oil pan with that motor and trans?
Catman, did you have to modify any crossmembers or run a different oil pan with that motor and trans?
K10 LS swap
- Thread starter catman3126
- Start date
Slightly ground the cross member on the pass side and since I ran the truck manifolds I cut a spot on the top of the frame rail for the collector flange to fit down in there. Moved the trans cross member back a inch or two. Use the Dirtydingo.com motor mounts they work great.
I really want to do a duramax swap in a cc square body to swap the newer seats in and some 4 link and coil overs up front with maybe Dodge front diff
I wanted to do the samething with my k10. And utilize an lbz, leafs, hp kingpin d60 and 14 bolt.
Looking good, I am
Doing a swap as well on my first truck a 96 ale GMC Sierra, a wild child edition back then lol
Doing a swap as well on my first truck a 96 ale GMC Sierra, a wild child edition back then lol
My 85 that will be going onto a 2004 tahoe chassis. Using pretty much everything electrical and all the drivetrain from the Tahoe
Donor Tahoe
Donor Tahoe
I've been shopping C list for the right 89-91 3500 to buy and do this too also.