Infotainment screen
- Thread starter Hillbilly52
- Start date
So when you "dismiss" the wifi message, the warning screen stays no matter what? Could be your HMI module blew a circuit.
Also if I turn ignition off the screen displays correct. When I start vehice is when the message comes up .
HMI is behind dash, usually behind radio area. Thats odd it only happens when truck is running. Does it go off when you put the truck into any gear?
Have you tried disconnecting the battery for a few minutes to allow the system to completely power down? Could be a programming glitch.
Have you tried disconnecting the battery for a few minutes to allow the system to completely power down? Could be a programming glitch.
No it does not go off when put truck in gear. will disconnect battery in the morning. Disconnect both batteries or just one?
The digitizer screen could be going out. Just turn the tuning knob to highlight the dismissal button, then press the center of it. Mines been out for a year or so on my 18.
The tuning knob acts like the tab key on a computer to change fields, the center of tuning knob is like the enter key.
The tuning knob acts like the tab key on a computer to change fields, the center of tuning knob is like the enter key.
To Mikey52.
You were correct in determining it was the digitizer touch screen. Swapped it out yesterday and it fixed the problem completely. Thanks !