In the 600s now!!

[2005LLY]

Had my buddy take my truck to dyno day while I was out of town, put down 643hp 13xx tq on fuel. I was pretty happy!

 

[2005LLY]

Here is the proof!

 

[matt78]

Congrats

 

[Noreaster]

Congrats, is that on a stock bottom end?

 

[2005LLY]

Yes it is :thumb:

 

[TLyons90]

Very nice!!! :thumb:

 

[hondarider552]

Go do a compression test..

 

[2005LLY]

Seems to be running fine lol

 

[Devon]

What's your setup 2005LLY? Good numbers. I'll keep your motor in my prayers lol.


Sent from my iPhone using Tapatalk

 

[DieselmafiaLLY]

Go do a compression test..

lol u think its that bad?

 

[2005LLY]

100% exergy, 68mm cheetah, ppe twin cp3, 3" Y bridge and intercooler pipe, BD manifold, 3" dp, 5" exhaust, 5" intake, full billet trans, efi by duramax tuner, and a raptor 150

I told Nick I wanted the truck to be 650hp so I think he did a pretty good job!

 

[SickLL7Crenshaw]

100% exergy, 68mm cheetah, ppe twin cp3, 3" Y bridge and intercooler pipe, BD manifold, 3" dp, 5" exhaust, 5" intake, full billet trans, efi by duramax tuner, and a raptor 150

I told Nick I wanted the truck to be 650hp so I think he did a pretty good job!

Your playing with fire you know that right?

 

[Balindir]

Your playing with fire you know that right?

Whats the worst that could happen? :rofl:

 

[DieselmafiaLLY]

Your playing with fire you know that right?

whats your truck making?

 

[2005LLY]

So your saying my 150 shot is pushing it way past its limits? :roflmao:

Yes I know stock rods are only good for high 5s low 6s. I think good tuning plays a huge role as well as how you drive it to keep the rods straight.

How do you like your lock up box?

 

[paint94979]

Torque torque torque

 

[2005LLY]

Peak torque doesn't come in till around 2400 rpm, I don't know how much is too much but when it had a stock turbo and injectors is did 520 and 1100, this set up did 640 and 1300

 

[Devon]

Them numbers are good man. I'd have him back it down closer to the 600rwhp mark. Or drive it like a gramma lol. But who knows, the truck may make it for a long time. Some people get lucky!


Sent from my iPhone using Tapatalk

 

[paint94979]

Peak torque doesn't come in till around 2400 rpm, I don't know how much is too much but when it had a stock turbo and injectors is did 520 and 1100, this set up did 640 and 1300

Way too much torque... FYI I made 701hp and right at 1000 ft lbs. My truck is still alive

 

[TheBac]

So your saying my 150 shot is pushing it way past its limits? :roflmao:

Yes I know stock rods are only good for low/mid 5s. I think good tuning plays a huge role as well as how you drive it to keep the rods straight.

How do you like your lock up box?

Fixed that for you. :rofl:650 on stock LLY rods....good god you're nuts.

The next sound you'll hear is "kaboom"......