I think I bent a rod :(

hondarider552

hondarider552

Getting faster
May 28, 2008
10,627
2
36
34
Arizona
On a Cat engine :D


Ventilated 3516 came into the shop today, drained the oil (110 gallons) pulled the pan, pulled #13 rod out and here we have it..





Here's me and the bare block of one few years ago for comparison.




Compare to a dmax.
 
hondarider552

hondarider552

Getting faster
May 28, 2008
10,627
2
36
34
Arizona
Chris they are 4 bolt rod caps, IIRC 15mm 12 points. Mains are 4 bolt and each main cap is around 50lbs.

Crank is like 1800lbs, and bare block is 4000lbs. fully dressed engine is north of 18,000lbs
 
clrussell

clrussell

pro-procrastinator
Sep 23, 2013
5,928
399
83
[QUO TE=motoking_1990;875579]Seems random. Or did the morph thing go over my head on this one.[/QUOTE]


Reply of the thread :)

I got a good laugh
 
56taskforce

56taskforce

Well-known member
Mar 30, 2014
1,081
56
48
hondarider552 said:
Chris they are 4 bolt rod caps, IIRC 15mm 12 points. Mains are 4 bolt and each main cap is around 50lbs.

Crank is like 1800lbs, and bare block is 4000lbs. fully dressed engine is north of 18,000lbs
Click to expand...

Brian I don't care how good a fabricator you are that ain't never going to fit in your truck :roflmao:
 
Burn Down

Burn Down

Hotrodder
Sep 14, 2008
7,092
28
48
Boise Idaho
hondarider552 said:
Chris they are 4 bolt rod caps, IIRC 15mm 12 points. Mains are 4 bolt and each main cap is around 50lbs.

Crank is like 1800lbs, and bare block is 4000lbs. fully dressed engine is north of 18,000lbs
Click to expand...

21,500 fully dressed 793D engine;)

Lol, I think your skinny enough to climb in the bores and check the squirter alignment...
 
You must log in or register to reply here.
Top Bottom