I like this idea I just used a parts washer it was a lot of work and didn't look like I did much they where clean but not What I was hoping for.I take a 12mm deep socket and put it on my electric impact gun. I take 4"x4" strips of red scotchbrite pad and roll them up like a dooby. Stick one end in my 12mm socket and the other end in my injector line. Hold the line with my hand and go semi-slow with my impact. It will clean the threads and polish the tip. Works like a charm
I take a 12mm deep socket and put it on my electric impact gun. I take 4"x4" strips of red scotchbrite pad and roll them up like a dooby. Stick one end in my 12mm socket and the other end in my injector line. Hold the line with my hand and go semi-slow with my impact. It will clean the threads and polish the tip. Works like a charm
x2You come up with some nice ideas for the DIYer. :thumb: Thanks.