How to clean hp lines on an lb7

[cafryer]

I have a set of hp lines on my 03 that have the reagular corossion build up whats everyone doing to clean them?

 

[Kspen90]

sub

 

[Mike_S]

Glass bead blaster worked well for me. Used that first and then an ultrasonic tank to remove any of the dust that was left behind.

 

[770JOHNNYW]

scotch brite in a good ole parts washer...cleans them up nice

 

[bullfrogjohnson]

I take a 12mm deep socket and put it on my electric impact gun. I take 4"x4" strips of red scotchbrite pad and roll them up like a dooby. Stick one end in my 12mm socket and the other end in my injector line. Hold the line with my hand and go semi-slow with my impact. It will clean the threads and polish the tip. Works like a charm

 

[madmatt]

X2 on the bead blaster

 

[cafryer]

Thanks guys.

 

[duramax3388]

I take a 12mm deep socket and put it on my electric impact gun. I take 4"x4" strips of red scotchbrite pad and roll them up like a dooby. Stick one end in my 12mm socket and the other end in my injector line. Hold the line with my hand and go semi-slow with my impact. It will clean the threads and polish the tip. Works like a charm

I like this idea I just used a parts washer it was a lot of work and didn't look like I did much they where clean but not What I was hoping for.

 

[TheBac]

I take a 12mm deep socket and put it on my electric impact gun. I take 4"x4" strips of red scotchbrite pad and roll them up like a dooby. Stick one end in my 12mm socket and the other end in my injector line. Hold the line with my hand and go semi-slow with my impact. It will clean the threads and polish the tip. Works like a charm

You come up with some nice ideas for the DIYer. :thumb: Thanks.

 

[cafryer]

You come up with some nice ideas for the DIYer. :thumb: Thanks.

x2