Hey Mike - LML / 2015 Trans questions

[Djreversal]

any updates on EFI launching tuning for the transmission for the LML's?



Mark

 

[NC-smokinlmm]

any updates on EFI launching tuning for the transmission for the LML's?



Mark

It's been done. I believe tuners are waiting on a way to lock the tunes.

 

[TDavis1992]

It's been done. I believe tuners are waiting on a way to lock the tunes.

Same info I've gotten.

 

[Mike L.]

Don't play with pressures if you're using my pump and valve body mods.

 

[Djreversal]

well I wouldn't be doing the tuning.. I was more curious about shift points and things like that. I know my LMM was a nice difference when they changed the transmission mapping.

 

[Mike L.]

The LML has the best strategy yet as far as pressure. They use it where it's needed, not all the time like earlier models.

 

[S Phinney]

What do you think about the new shift kits for them?

Sent from my SM-G920V using Tapatalk

 

[Mike L.]

What do you think about the new shift kits for them?

Sent from my SM-G920V using Tapatalk

There is no shift kit for them. We raise and regulate pressure.

 

[S Phinney]

I see the name is a line pressure upgrade kit then. Is it worth doing without doing a full build for a tuned deleted daily driver?

Sent from my SM-G920V using Tapatalk

 

[Djreversal]

I don't have a choice but a full build at this point.. but I just wanted to see if they ever got into the tuning of it for like raise rev shifts or quicker shifts or whatever.

 

[Mike L.]

I see the name is a line pressure upgrade kit then. Is it worth doing without doing a full build for a tuned deleted daily driver?

Sent from my SM-G920V using Tapatalk

Trans has to come out for this mod. Pump has to be dis-assembled. Converter clutch may not like the higher pressure as it can break the lining off.
Ben's pressure mod works well instead as it is all electronic.

 

[S Phinney]

Trans has to come out for this mod. Pump has to be dis-assembled. Converter clutch may not like the higher pressure as it can break the lining off.
Ben's pressure mod works well instead as it is all electronic.

So you at minimum should replace the convertor if you do this?

Sent from my SM-G920V using Tapatalk

 

[Djreversal]

i think hes saying the way he does it with modifying the pump and all the whole trans is coming apart so u might as well just do it while your in there.. if your going to do the pump mod and the torque converter your already more then half the cost I'm sure.. might as well just put the clutch kit in there to.

 

[Mike L.]

^^^^

The clutches in the LML leave a lot to be desired. They won't hold much power.