Question: Grease it every 3-4000 miles like we're supposed to.

c20elephant

C20ELEPHANT
Apr 25, 2013
2,065
0
0
Phoenix, Arizona
Greasable front end parts, ujoints were designed in era when oil changes were every 3-4000 miles and we greased them at that time (my 1982 has 21 zerks I could do it blindfolded). With the advent of synthetics and oil changes extended to 7500+ miles ya think we're missing greasing the parts at 3-4000 miles..?
 

lts1ow

Needs moar PAH!
May 14, 2012
1,598
0
36
NJ
I still change my oil at 3k and grease everything cause well, its on the lift might as well. :D
 

Chevy1925

don't know sh!t about IFS
Staff member
Oct 21, 2009
21,743
5,911
113
Phoenix Az
i change my oil twice a year and grease once a year but at the rate my truck gets driven, its only about 6-7k a year. I use CAT Gold grease (have about 10 tubes left and cant get it anymore). its a sticky, nasty grease but it stays where it should and keeps things alive. my right LCA ball joint has 202k miles on it and just as tight as the new left side one i put on 10k ago.
 

Dozerboy

Well-known member
Jun 23, 2009
4,916
496
83
TX of course
I use a high moly grease that I got from work years ago. Maybe greased it every 30k, because it never needed any. At 170k my ball joints are a little loose, but everything else is still tight.

Sent from my SAMSUNG-SM-G900A using Tapatalk
 

PureHybrid

Isuzu Shakes IT
Feb 15, 2012
3,517
501
113
Central OH
I've always used Schaeffer's 221 moly black, grease every 10k. At 216k I've never replaced any front end parts. Steering isn't like new, but it doesn't wander, and ball joints are tight.
 

THEFERMANATOR

LEGALLY INSANE
Feb 16, 2009
3,890
44
48
44
ZEPHYRHILLS, FL
I grease the front end every 10K miles when I do my oil and filter changes. Just easier for me to do it all at once. Here lately 10K miles is about every 18 months.
 

Hot COCOAL

May the farce be with you
Jun 9, 2012
4,433
0
0
Man Ferm, I can not go that long with this Washington weather! I grease mine every 3-5k and sometimes that isn't even enough...I do put my rig thru the wringer tho, between taking it off road and flexing out the joints and 75+mph freeway speeds with the standing water we get on our highways and byways, even the tackiest of greases doesn't seem to hold up for too long...the poly bushings on the Cognito UCA's are usually the first to sound off and it really makes the truck feel/sound like a POS when they do, lol
 

Attachments

  • IMG_20160326_231210208_HDR.jpg
    IMG_20160326_231210208_HDR.jpg
    206.1 KB · Views: 63

OregonDMAX

NOT IN OREGON, NO DURAMAX
Apr 28, 2013
3,964
8
38
36
Goodyear, AZ
That never happened, it never leaves the driveway :roflmao:

But I do drive across the street to get beer quite often