My last 60' was 1.83 with the 8.02 pass and mike I took out back seat hitch spare and spare carrier and tailgate
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Goin to the track.
- Thread starter brokesmoker
- Start date
My truck with no spare, no spare carrier, roll pan, 1/8th tank and me in it weighs 6920lbs. Now I know why I've always needed more fuel and air to get to a 12.0 @113. Im 500-700 pounds heavier than all the crew cabs I see running quick times on stock fuel systems.
I'm not 100% my weigh was accurate from what everyone else was weighing I will get it weighed again at a place with more accurate scales it seems really light
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
I have no interest in removing anything more than what I mentioned earlier. I want to know what my truck runs the same way it is when I drive it on the street or at the track.
I told myself the same, until I saved everything I removed, nuts,bolts, you name it. It added up to be 550lbs from my single cab.
I removed tonneau cover, bed rails, tailgate, side steps, bumper, hitch, bedliner, spare + bracket and thats 6700 for me
Lightest it has been with me in it and 10 gallons of fuel was 5430.
Since I added the 6 point bar its 5650 with me in it.
its been awhile but I think the back crew cab leather seats are like 80 lbs. The front passenger leather seat is damn near 65lbs by itself.
More like 150 for both pieces. PS full-power front seat is close to 90.
Good Lord you guys are freaking rookies. Go do a search for weight reduction from about 2009.
When are you gonna come to the track lolMore like 150 for both pieces. PS full-power front seat is close to 90.
Good Lord you guys are freaking rookies. Go do a search for weight reduction from about 2009.
Would take a while to get the blue truck back up and running. Red truck is still in pieces in the shop.
Broke, all terrains arent the best choice for tires, but you use what you've got. Keep at it, you'll get there. :thumb:
It's too late for last nights trip but I'd drop pressure a few psi front and back. Also do you have spring clamps or some kind of traction bars? I use to cut low 1.7s with pyos and worn out michilins.