What are our options for driveshafts? Mine is about to be toast and wondering if I should replace with another stock unit or if there are upgrades available.
Driveshaft Options?
- Thread starter SSchmi5519
- Start date
I would leave it, but where it got chewed up its now cracked, so its very near the end.
I thought about it today and checked it and saw the crack
I'll try to get a pic here in a sec.
I thought about it today and checked it and saw the crack
I'll try to get a pic here in a sec.
Danville has aluminum ones. Not sure if they can do them for a crew cab, you would have to call them and find out.
My front and back driveshaft is from cci, top quality products and nice people to deal with.
http://www.driveshaftspecialist.com/Truckhtml/Chevy-GMC.html
This place looks pretty legit and they still use the aluminum to keep weight down.
This place looks pretty legit and they still use the aluminum to keep weight down.
I would leave it, but where it got chewed up its now cracked, so its very near the end.
I thought about it today and checked it and saw the crack
I'll try to get a pic here in a sec.
either go down to AZ driveline or TAD up here by the shop and have them build you a new steel one or just get a stock replacment. is it cracking where you chewed up the u-joint yokes from no axle wrap bars?
id just get a nice steel one built at the shop up here by my work. they have built the shafts for the samurai and will be building the shafts for the buggy when its done.
