Drag racing questions?????

LBZ1991

New member
Nov 21, 2014
215
0
0
Winfield, MO
When I ran last fall after I built the trans I hit a 12.8 at 104. I had a bad 60ft and only got to run once. That was on completely stock fuel and air besides a lift pump
 

Evan@InglewoodTrans

yerp
Vendor/Sponsor
Aug 5, 2010
3,118
65
48
40
Western MA
I know everyone raves about these modified stock VVT turbos, but twins are on a whole different level. Lots of trucks with just trans, tuning, lift pump, and twins running low 12s, high 11s. I did it back in '07 with my LBZ.

That's because they drop in and with fuel will put a crew cab into the mid 11's without a issue. I love twins but the modified VVT's of late hold there own just fine.
 

Josh154

Well-known member
Sep 28, 2015
1,220
85
48
Sioux Falls SD
I don't have very good tires for racing and I was spinning. I really don't feel like my converter was locking up right way either. The track was also really cold like 55 degrees. Everyone was fighting traction. My next street legals night is June 24th so I should have some better times then
 

MD_Max

Need More LLY's
May 2, 2014
85
1
8
I don't have very good tires for racing and I was spinning. I really don't feel like my converter was locking up right way either. The track was also really cold like 55 degrees. Everyone was fighting traction. My next street legals night is June 24th so I should have some better times then

Im guessing you're running the tires in your sig? We have cut the best 60s with just PYOs. I run 245/75/16 right now and haven't had issues yet.
 

Chevy1925

don't know sh!t about IFS
Staff member
Oct 21, 2009
21,743
5,911
113
Phoenix Az
Yeah with fuel they can come alive. Dan weaver with the 68 danville made 750 on my dyno and did some mid/low 11s in his ext. cab!



I'm looking forward to how this single Danville 68 does in Levi's reg cab built engine truck. It's gunna be a fast/fun truck when we turn it up next week
 

MarkBroviak

DMax Junkie
Vendor/Sponsor
May 25, 2008
2,141
499
83
Danville Indiana
I'm looking forward to how this single Danville 68 does in Levi's reg cab built engine truck. It's gunna be a fast/fun truck when we turn it up next week

Yes it will be fun! This is what it did on a junkyard motor in my truck with 12mm CP3 and 250%inj. on fuel only and it made 780hp. It didn't hurt the motor, all the rods were still perfect when we took it apart last month! I have my built motor back in with it on same fuel setup and made 817hp 1504ftlbs so I am hoping to see hi 10's with it.:thumb:

https://www.youtube.com/watch?v=FVUx8nDsdIU&index=6&list=LLV6Kphz6imzjrc9kM2sCV6A
 

JoshH

Daggum farm truck
Staff member
Vendor/Sponsor
Feb 14, 2007
13,735
804
113
Texas!!!
That's because they drop in and with fuel will put a crew cab into the mid 11's without a issue. I love twins but the modified VVT's of late hold there own just fine.
I didn't mean that as a slight toward the VVT trucks. I was simply saying that comparing his truck to the other guy's truck with twins isn't exactly a fair comparison. I know a lot of guys are doing very well with single VVT tubos, but it generally takes more than just a turbo to see the gains.
 

Chevy1925

don't know sh!t about IFS
Staff member
Oct 21, 2009
21,743
5,911
113
Phoenix Az
Yes it will be fun! This is what it did on a junkyard motor in my truck with 12mm CP3 and 250%inj. on fuel only and it made 780hp. It didn't hurt the motor, all the rods were still perfect when we took it apart last month! I have my built motor back in with it on same fuel setup and made 817hp 1504ftlbs so I am hoping to see hi 10's with it.:thumb:



https://www.youtube.com/watch?v=FVUx8nDsdIU&index=6&list=LLV6Kphz6imzjrc9kM2sCV6A



I know, I got plenty of videos from you when you took her home the night after we talked about suspension lmao. That's 90% of the reason I pushed Levi for this turbo. I know it's going to be an awesome setup even at 7k feet elevation
 

bluessmax

Tabasco Injected!
Nov 4, 2010
1,143
6
38
Lake Charles, la
Well... A Danville stage2r we tune on a LML just went 11.46@120 tonight. The best to that has been 11.5s. These 2r chargers are nothing short of impressive - I'll say that. I have one to stick in the compound setup on mine.


Sent from my iPhone using Tapatalk
 

custom8726

Active member
Feb 25, 2008
2,784
0
36
Upstate N.Y
Well... A Danville stage2r we tune on a LML just went 11.46@120 tonight. The best to that has been 11.5s. These 2r chargers are nothing short of impressive - I'll say that. I have one to stick in the compound setup on mine.


Sent from my iPhone using Tapatalk

Stock motor? (Internally)
 

clrussell

pro-procrastinator
Sep 23, 2013
5,928
399
83
Curious as to how much alignment effects 60'..

Will a truck that's properly aligned at lowered height cut a better 60' than the identical truck that's had the torsions let down at the track?
 

Chevy1925

don't know sh!t about IFS
Staff member
Oct 21, 2009
21,743
5,911
113
Phoenix Az
Curious as to how much alignment effects 60'..

Will a truck that's properly aligned at lowered height cut a better 60' than the identical truck that's had the torsions let down at the track?



Actually, a truck properly aligned for the track/truck setup will perform better than either