Dirty fuel filter comparison

Dmaxbro!

Nice DMax bro!!
Apr 20, 2014
90
0
0
47
Montreal
For the ones who are curious.
I changed my fuel filter at approx. 10000km and this is the results.
c3705efeb9de512ed96de1ed4d18db99.jpg


And this is my buddy's (Duramaxdiesel) fuel filter at approx. 74000km
b2b22b3099ff7771b3a1258116f311fd.jpg


Both are the same filters (racor).



Sent from my iPhone using Tapatalk
 

Chevy1925

don't know sh!t about IFS
Staff member
Oct 21, 2009
21,655
5,803
113
Phoenix Az
That really doesn't say much. Pulling the media apart gives much better story but since you used something like a sawzall or grinder to cut it open, your going to find a bunch of crap in both filters now.
 

LBZ

Super Moderator
Staff member
Jul 2, 2007
9,903
149
63
46
B.C.
You can still pull the pleats open and look at the areas not near the cut.
 

Dmaxbro!

Nice DMax bro!!
Apr 20, 2014
90
0
0
47
Montreal
That really doesn't say much. Pulling the media apart gives much better story but since you used something like a sawzall or grinder to cut it open, your going to find a bunch of crap in both filters now.


I know you see the sawzall there in the pic but I cut it by hand with a metal hack saw as I didn't have anything to hold the filter with. I know it's not a good way to cut it open, just a quick view. But you do see a big diff between both filters


Sent from my iPhone using Tapatalk
 

Chevy1925

don't know sh!t about IFS
Staff member
Oct 21, 2009
21,655
5,803
113
Phoenix Az
Yup. The color isn't what you should be looking for. It's the trash inside you should be looking at.
 

Dozerboy

Well-known member
Jun 23, 2009
4,892
470
83
TX of course
Cut the filter (metal housing) at the top right at below the crimp. Then pull it apart then you can get a better look at the filter.
 

Dmaxbro!

Nice DMax bro!!
Apr 20, 2014
90
0
0
47
Montreal
What would be the best way to cleanly cut open a fuel filter?

Some type of large pipe cutter?


Sent from my iPhone using Tapatalk
 

Mile_high

The Mad Hatter
Oct 31, 2009
702
1
18
Denver, Colorado
What would be the best way to cleanly cut open a fuel filter?

Some type of large pipe cutter?


Sent from my iPhone using Tapatalk


If you bury utility for a living and have bigass pipe cutters like me...yes. But the one in that link makes a clean line right by the crimp so you can pull the whole membrane out and inspect it.
 

Dozerboy

Well-known member
Jun 23, 2009
4,892
470
83
TX of course
Sawzal works just fine right by the crimp. Just remember you can start a fire.


Sent from my iPhone digging a ditch near you.