Chamber Pressure Testing road trip

[Fingers]

I am thinking of taking a couple road trips this January to visit a few shops and do some chamber pressure monitoring in conjunction with dyno tuning. Kinda peddle the wares and maybe help out a few people.

If anyone is interested, let me know. I have two places lined up for private sessions right now. Thought it might be a good thing for others too.

 

[minisub]

Let me guess.

January, so you are probably headed to some paradise like Wisconsin to test the cold starting ability of the new motor? :rofl:

Schedule and timing dependant, I might like to tag along

 

[SIKDMAX]

Where are you located and where are you thinking of? Areas.

 

[duratothemax]

Thinking of coming out a little further east at all Jon?

 

[Fingers]

I would be interested in the west coast, but not for only one session. The $$ for the ticket would not make it worth it. I would want to spend at least 2-3 days playing.

8 hrs Driving distance from Pgh is easy. I'll be there.

The in betweens are the hard call. East of the Mississippi isn't hard to justify.

Ben, you're at around 9 hrs. That's doable if I can get a couple high performance trucks to log. Lesser engines too, but only in quantity.

I plan on at least one stop in Indiana and Wisconsin so far. Talking about a trip to the Carolinas too. Was hoping for a Florida and Texas run, but only if invited. Idaho is interesting as a Mecca of twin turbos. SoCal for the usual reasons. Then there is Australia....

 

[Fingers]

Let me guess.

January, so you are probably headed to some paradise like Wisconsin to test the cold starting ability of the new motor? :rofl:

Schedule and timing dependant, I might like to tag along

January because I have the free time. Though I might try again in the summer if there is enough demand.

 

[duratothemax]

9 hours from PA to CT, kick up the cruise control a bit Jon!! Last summer I drove from my house to wisconsin (just outside of milwaukee) in about 13 hours

 

[Fingers]

It is amazing how much time it takes to slide south from Rt 80 to Pgh. No good way to go. Best time so far to New London has been 7-1/2 hrs, but I was cookin in the Solstice.

 

[bullfrogjohnson]

Let me know if you come to the Carolinas.

 

[pepperidge]

Well if you are passing through Louisiana on your way from Florida to Texas give me a holler...if anything we'll grab a beer and some good food...

 

[bullfrogjohnson]

What is your preferred dyno of choice?

 

[TheBac]

I am thinking of taking a couple road trips this January to visit a few shops and do some chamber pressure monitoring in conjunction with dyno tuning. Kinda peddle the wares and maybe help out a few people.

If anyone is interested, let me know. I have two places lined up for private sessions right now. Thought it might be a good thing for others too.

Where were you about 6 months ago? :rofl: You would have saved me a few $$$.

Have fun on the road trip!

 

[dmaxalliTech]

Heading to the dyno with 3 trucks in early/mid december John

 

[TrentNell]

If you hit up the west coast let me know were , my motor should be done by then , low compression big boost would be interesting to test for comparison with what you have already tested .

 

[juddski88]

depends on when in jan, but i should be home during the first couple weeks for R&R. i could provide my "stock" 01 with a tow tune in it, and a 500-550hp 04 lb7 with a 2.5" s400. probably could get a stock lmm to come with me too, and maybe Leadfoot and his lbz with Mcrat's tuning.

if you wanted to, we could probably set up a day at Jannetty's, he has a superflow dyno, it would be kinda central. i don't know if Jay has his motor up a going again, if he does, his truck would be quite a test as well:thumb:

 

[05_LLY]

Jon, I have access to a dyno in sarver and can supply two mild hp trucks!

 

[fishsmith]

If you come through this way Jon let me know. My motor should be back up by then. We have a few other trucks as well from lb7 to lmm just pick your motor.

 

[SIKDMAX]

I'd be interested as well. 1000hp built motor with twins.

 

[Fingers]

Jon, I have access to a dyno in sarver and can supply two mild hp trucks!

Local runs always welcome. Just let me know when.

 

[Fingers]

Well if you are passing through Louisiana on your way from Florida to Texas give me a holler...if anything we'll grab a beer and some good food...

Just got back from the New Orleans area. Gooood food, good people.