Bye Bye Jetta DPF.

moss

<--good vibrations
Dec 15, 2008
296
0
16
43
sandwich, il
Still has the factory cat back exhaust which is smaller and has a muffler, but we will see how it sounds. I'll get a cat back exhaust for it soon, and then if its too "annoying" I will add a resonator.

Got everything together tonite. ECM should be back tomorrow morning, I ruined an EGT sensor though, it wouldn't come out and ended up ruining the lower half of the threads hopefully the dealer has on in stock and I can pick it up tomorrow. Then I'll get to test it all out.

Video when done, or it never happened. Facebook it if it's easier
 

durallymax

New member
Apr 26, 2008
2,756
1
0
Under The Hood
Well this thing rips....

Spins the tires in 2nd and slips the clutch if you roll into it in 3rd or 4th. Its fun to drive. Its actually pretty quiet still, no noise inside and outside you just hear the turbo whistling through the exhaust.

Supposed to be around 300ft-lb of torque at the wheels.

I'll get a video up later.
 

LBZ

Super Moderator
Staff member
Jul 2, 2007
9,903
149
63
46
B.C.
What clutch options are there and how much are they?
Got a cousin with a 2011 diesel Jetta he wants to get rid of the ailing dpf on.
He wants to do the same setup but was concerned about the clutch. Rightly so it seems!


Sent from my iPhone using Tapatalk
 

durallymax

New member
Apr 26, 2008
2,756
1
0
Under The Hood
There's a lot of clutch options. From a couple hundred on up.

I guess the tuning is chattering the DMF, I can get it changed to avoid this but haven't yet.

The clutches are a piece of cake to replace. The price goes up some if you swap to a SMF but it is worth it although they are much noisier than the DMFs especially in drive throughs.


Didn't get the panzer plate on yet but got the snow tires on for winter. Even with the new Pilot Sport A/S 3's, it was still pretty worthless on the slippery stuff. For the snows I went down to 205/60r16 Michelin X-Ice Xi3's. Other than the low ground clearance it gets around great.
 

Attachments

  • uploadfromtaptalk1387750541904.jpg
    uploadfromtaptalk1387750541904.jpg
    54.1 KB · Views: 50

durallymax

New member
Apr 26, 2008
2,756
1
0
Under The Hood
Think its possible to get the stock exhaust off without a lift? Debating on having it done or doing it myself

As long as you can find a way to fit under the car safely then yes it is, lots of people have done it. I'ts not too hard really.

I recently finished up the exhaust on it, I had a twitch bugging me so I bought the Borla Cat Back and put it on to finish off the exhaust. I was going to do Rawtek as it would've eliminated the little spot where everything necks down but shipping was $120. The Borla was free with Amazon Prime, same 304 stainless, same tips, so i'm happy enough. I may deal with the necked down part someday but I don't think its hurting anything. I may still add a resonator if the wife wants. This thing is about 10 times louder than my ALH straightpipe and louder than my Duramax was too. Sounds a lot like a Subaru boxer with a big turbo and straight pipe. At least all of the Prius's can hear it now when I'm dodging them everywhere they drive.

This chunk of exhaust does have to get cut in half to come out. Theres probably a way to save it but I don't see the point. if you put all of the filters back on the stock muffler does almost nothing.






Yes it's missing the lower piece of the bumper, not sure where it went, been missing for awhile. Tip's look nice though, but they do turn sooty fast, could be that I just like the sound and feeling of a little car's torque rise at 1700RPM walking away from stop n go lights.




Speaking of bumpers, the wife had a run in with a frozen traffic cone this winter......thunderbunny got hurt. Patched it for now and looks good from 10'. Guess I will practice my plastic welding skills this summer fixing it.





I also took some time to put some "Euro" touches on it. The left side glovebox, and the dash compartment (replaces vent). I like storage stuff like that. The american versions didn't get these. Probably put the underseat drawers in too. I really like the one on the dash the most though, best money ever spent. All of this is VW parts too so it fits perfect and doesn't look cobbled. I can't really add any more power to her car without needing a clutch and the 6spd clutches are pricey, plus she doesn't need more anyways. I've never been one to buy much for looks but this car's special.

Wife does here makeup between jobs in the car, been a little busy and haven't detailed it in a bit so excuse the mess.











I was bidding on an edition 35 shifter but lost. I'd like to find the shifter, steering wheel and e-brake. I think they would look nice in this car and kind of complete the half way GLI type job VW did with it. I'd love some Bi-Xenon GLI lights but those are pricey. Proving to be tough to find a steering wheel without paddle shifters as well unless I want to pay $500 to some dude in Mexico.


Edition 35 interior (its a golf and MK6 so it differs, but the steering wheel and such are the same)





Refresher of the TDI Cup interior for those who haven't seen. GLI seats, black trim, billet pedals but kinda blan.

2010-Volkswagen-Jetta-TDI-Cup-Edition5.jpg
 
Last edited:

Cougar281

Well-known member
Sep 11, 2006
1,809
252
83
St Louis, MO
I need to look into this for my wife's TDI. Had the DPF and EGR filter replaced at about 76k under warranty, so that bought us some more time, but I am NOT buying a new DPF when it goes bad. I would MUCH rather delete the POS and keep it in the shop in case I ever need to put it back....
 

bigmackmiller

Active member
Nov 30, 2008
1,046
2
38
Kokomo, IN
I need to look into this for my wife's TDI. Had the DPF and EGR filter replaced at about 76k under warranty, so that bought us some more time, but I am NOT buying a new DPF when it goes bad. I would MUCH rather delete the POS and keep it in the shop in case I ever need to put it back....

Yeah thats my thoughts if it goes out of warranty its some big $$$ to replace
 

bigmackmiller

Active member
Nov 30, 2008
1,046
2
38
Kokomo, IN
The Edition 35 looks sweet! If I run across some I'll pass it along, my wife's car is in the same boat lol...makeup and crap everywhere i'm going to have to give a lecture
 

durallymax

New member
Apr 26, 2008
2,756
1
0
Under The Hood
Finally got some vids. The bang at the end of the in cab was the skid plate bottoming out on going through an intersection.

[YOUTUBE]0QtQefMf52k[/YOUTUBE]
[YOUTUBE]n5Ns2Kqp-Mo[/YOUTUBE]
 

durallymax

New member
Apr 26, 2008
2,756
1
0
Under The Hood
maybe I missed it but what does it take to remove the DPF? just by itself?

Everything I did in the first post. Exhaust to replace everything back to the last section and a tune. If you get a big tune like I got but have a DSG you will need a DSG tune as well. You do not need to delete the muffler and if you want a cat still there are aftermarket options.

Sent from my SCH-R970 using Tapatalk