Broviak built his so I guess I'll build mine too

H

Hot COCOAL

May the farce be with you
Jun 9, 2012
4,433
0
0
smkndmax05 said:
I already have a modded pump in the valley.
Click to expand...
How is your cp3 modded?
Damn bro, your current set up is pretty much exactly what i have been building up to, how has it treated you?
I am really excited to see someone pull it off before me, helps give me a little more confidence when pulling the trigger on the bigger steps of the "build" ;)

Congrats on your next step, let us know what this next chapter reveals! Of course i am going to be looking for your results, hopefully i will have the injectors (100% exergy's) by March, and the vgt 72 upgrade by june! :woott: lol, following in your footsteps:eek:

Good luck!:thumb:

Chevy1925 said:
My tuner ****ed up then.... lol


Nice build! Should be fun!
Click to expand...

has Bri been tuning your truck?:roflmao::hug:
 
smkndmax05

smkndmax05

"Smoked Out"
Feb 17, 2011
479
0
0
Indiana
My setup has been great for over two years. We believe my rods are still straight because of conservative tuning, but we will know more when I get it out of the truck. I believe I will be close to the 800+ with the variable charger and if it gets a big brother, it could be 1000+.....There are really no goals, just have fun with the truck....It's still a daily driver/weeknd warrior.
 
J

jkholder09

New member
Jan 8, 2012
1,188
0
0
Maryland
smkndmax05 said:
My setup has been great for over two years. We believe my rods are still straight because of conservative tuning, but we will know more when I get it out of the truck. I believe I will be close to the 800+ with the variable charger and if it gets a big brother, it could be 1000+.....There are really no goals, just have fun with the truck....It's still a daily driver/weeknd warrior.
Click to expand...


I had the 72 for a good bit, and it is awesome.
I put a twin on it, but went back to a single.
the engine you are building and the 72 will be all you need It is an awesome combo and super reliable
with all the fuel you have I think a wastegate would be great
 
whitelmmmax

whitelmmmax

Smaller than stock
Jul 26, 2011
693
0
0
37
lake charles, la
jkholder09 said:
I had the 72 for a good bit, and it is awesome.
I put a twin on it, but went back to a single.
the engine you are building and the 72 will be all you need It is an awesome combo and super reliable
with all the fuel you have I think a wastegate would be great
Click to expand...

With the 72 VVT as a single why would you need a wastegate?:confused:
 
TROJAN366

TROJAN366

Gold Rush
Jan 13, 2012
2,474
1
38
MASS
This is almost exactly the same as my build. Look forward to seeing how yours does with the 72 then I can decide if I should go from 68-72 or do an s480
 
jnieberlein

jnieberlein

Secret Squirrel Diesel
Aug 17, 2009
689
0
16
West By God
whitelmmmax said:
With the 72 VVT as a single why would you need a wastegate?:confused:
Click to expand...


Because the housing in the 72vvt turbo is still really tight in relative terms compared to the amount of fuel its getting, and it will help reduce drive pressure and Mark makes a really sweet lookin wastgate setup :thumb:, and in this case for two similar built trucks it will be good for comparison sake :hug:
 
whitelmmmax

whitelmmmax

Smaller than stock
Jul 26, 2011
693
0
0
37
lake charles, la
jnieberlein said:
Because the housing in the 72vvt turbo is still really tight in relative terms compared to the amount of fuel its getting, and it will help reduce drive pressure and Mark makes a really sweet lookin wastgate setup :thumb:, and in this case for two similar built trucks it will be good for comparison sake :hug:
Click to expand...

Ah. Very cool. Wasn't aware that was available.:thumb:
 
smkndmax05

smkndmax05

"Smoked Out"
Feb 17, 2011
479
0
0
Indiana
I picked up the block from the machine shop this morning......I will start assembly this weekend when Tark gets up here. I'll post some pictures later on today
 
smkndmax05

smkndmax05

"Smoked Out"
Feb 17, 2011
479
0
0
Indiana
Build Pics

We made some progress over the weekend. Thanks for the help Tark.....
 

Attachments

  • image.jpg
    image.jpg
    89.4 KB · Views: 148
  • image_1.jpg
    image_1.jpg
    89.5 KB · Views: 140
  • image_2.jpg
    image_2.jpg
    90.4 KB · Views: 141
  • image_4.jpg
    image_4.jpg
    85.1 KB · Views: 145
smkndmax05

smkndmax05

"Smoked Out"
Feb 17, 2011
479
0
0
Indiana
And if any ones looks closely my heads are on BACKWARDS, but it was for picture purposes only....My heads still need to go to the machine shop....:woott:
 
You must log in or register to reply here.
Top Bottom