Brake upgrades

[KyleC4]

gmduramax, seems like you do a lot of work with brakes. Any preference or recommendation for ss braided lines?

 

[gmduramax]

I got them from the dmax store. Not sure if any vendors sell them

 

[TheBac]

gmduramax, seems like you do a lot of work with brakes. Any preference or recommendation for ss braided lines?

Russell 672440 is what I bought.

 

[OregonDMAX]

Russell 672440 is what I bought.

don't rememeber what part # i got but i assume they are the same ones, either way the russell lines are very nice quality and made a huge improvement in my brake pedal feel and brake performance

 

[GOGO]

I highly recommend lines from crown.


Sent from my iPhone using Tapatalk

 

[gmduramax]

I don't think Russell makes lines for 07.5 and up

 

[Harbin_22]

Crown Performance is the only place I could find that makes them all for 07.5 up trucks. Was a nice kit with all necessary brackets and parts. Little pricey, but a nice kit

 

[c20elephant]

Crown Performance is the only place I could find that makes them all for 07.5 up trucks. Was a nice kit with all necessary brackets and parts. Little pricey, but a nice kit

Crown Performance did not have the lines for the 2001-2006 trucks till I spent some time to give them fitting measurements for the rear lines at the calipers, so I have the first set they made on my truck.

The kit fits like OEM parts with all the brackets like you stated. After replacing the lines I cycled the ABS module several times via a TECH-II and the it stops a 100 times better between the new hydraulic lines and bleeding...

 

[ripmf666]

These wild woods were just for sale the other day 1,500.00

 

[TheBac]

I wonder why Dylan didnt have those for sale on here along with all the other parts he had?

 

[moparkxracer]

That's very cheap for both sets.

 

[minerigger]

Wondering the same thing tom, I bet they would go fast. On this topic of brake I put in a set of the Russell stainless lines and it helped pedal feel alot. Flush the fluid every 2 years regardless of miles. I'd like a 11 hydrobooster and new stainless hardlines to replace all the factory stuff

 

[KyleC4]

So, when you guys upgrade to the '11 LML hydroboost do you use the your same master cylinder that came with your truck? Or is that changed as well? Cause by GM part number my master cylinder only goes on 01-02 vehicles.

 

[Noreaster]

I like the reactive one rotors from Napa, their pricey but their really holding up well to the salt environment up here

 

[gmduramax]

So, when you guys upgrade to the '11 LML hydroboost do you use the your same master cylinder that came with your truck? Or is that changed as well? Cause by GM part number my master cylinder only goes on 01-02 vehicles.

I used the factory master on an 04,05,07.5, and 08

 

[c5fourj]

Do you guys have a part number for the 2011 hydrobooster? Mine just started leaking out if the weep hole.

 

[Awenta]

Do you guys have a part number for the 2011 hydrobooster? Mine just started leaking out if the weep hole.

178-0853


Sent from my iPhone using Tapatalk

 

[c5fourj]

178-0853


Thanks

 

[WisconsinHick1]

Do you guys have a part number for the 2011 hydrobooster? Mine just started leaking out if the weep hole.

I might be willing to sell the one off my 2001 race truck. It was on there for about 2,000 miles. It did help braking.

 

[c5fourj]

I might be willing to sell the one off my 2001 race truck. It was on there for about 2,000 miles. It did help braking.

Thanks for the offer but I am going to order a new one.