Blew a headgasket

[Harbin_22]

Long block I think. With or without fuel.

 

[paint94979]

Machine work that I should have done?

Deck the block
Line bore hone
Keyway the crank and cam (in I stay stock)

What else?

 

[Awenta]

Valve job. Make sure they take off the intake whatever they take off the head.

Sent from my SM-N910V using Tapatalk

 

[paint94979]

Obviously mag the crank, clean everything

 

[TheBac]

Machine work that I should have done?

Deck the block
Line bore hone
Keyway the crank and cam (in I stay stock)

What else?

You're asking this like some newbie? :roflmao::roflmao: I dont know why, but I find that extraordinarily funny.


Balance rotating assembly
Staying with stock pistons? Cut lip

 

[NC-smokinlmm]

Make sure the shop doing the work has a deck plate.

 

[TeaBagger2006]

LBZ swap

 

[paint94979]

You're asking this like some newbie? :roflmao::roflmao: I dont know why, but I find that extraordinarily funny.


Balance rotating assembly
Staying with stock pistons? Cut lip

I've been semi absent Tom balance is a given I'm gonna go with fingers pistons

 

[Harbin_22]

I've been semi absent Tom balance is a given I'm gonna go with fingers pistons

Get ahold of funk. He has a complete engine ready to go. Cut a tooth off the reluctor, run LBZ heads and injectors and be good to go. It has Carrillos with Arias forged pistons, Socal cam, studs, etc. Thing runs and sounds awesome. No wait, no worry, it was built right. About the only thing I would change is to an AF cam. You probably need heads too.

 

[TheBac]

I've been semi absent Tom balance is a given I'm gonna go with fingers pistons

I know, Im just picking on you. Harbin has a pretty good idea right there. Funk always seemed to have his shit together.

 

[paint94979]

I am getting the machine work practically sponsored so I'm gonna be able to build this thing dirt cheap using top quality parts

 

[Chevy1925]

I am getting the machine work practically sponsored so I'm gonna be able to build this thing dirt cheap using top quality parts

:roflmao: this ought to be good

call me nicky and i can give you a run down for your newbness :hug: